MC6×18 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC6×18 is an AISC MC shapes: miscellaneous channels channel. It is 6 in (152.4 mm) deep with a 3.5 in (88.9 mm) flange, a 0.379 in (9.6 mm) web and an average flange thickness of 0.475 in (12.1 mm), and weighs 18 lb/ft (26.8 kg/m). Area 5.29 in² (3,413 mm²); centroid 1.12 in (28.4 mm) from the back of the web; Ix = 29.7 in⁴ (1,236.2 cm⁴), Sx = 9.89 in³ (162.1 cm³).

dDepth
152.4 mm6 in6 in152.4 mm
bfFlange width
88.9 mm3.5 in3.5 in88.9 mm
twWeb thickness
9.6 mm0.379 in0.379 in9.6 mm
tfFlange thickness (average)
12.1 mm0.475 in0.475 in12.1 mm

Drawing

88.9 mm3.5 in152.4 mm6 intf 12.1 mmtf 0.475 intw 9.6 mmtw 0.379 ine 28.4 mme 1.12 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC6×18 specifications

dDepth6 in152.4 mm
bfFlange width3.5 in88.9 mm
twWeb thickness0.379 in9.6 mm
tfFlange thickness (average)0.475 in12.1 mm
kDesign value1.06 in26.9 mm
kDetailing value1 1/16 in27.0 mm
WWeight18 lb/ft26.8 kg/m
AArea5.29 in²3,413 mm²
x̄Centroid from back of web1.12 in28.4 mm
eoShear centre from web1.17 in29.7 mm
IxMoment of inertia, strong axis29.7 in⁴1,236.2 cm⁴
ZxPlastic modulus, strong axis11.7 in³191.7 cm³
SxSection modulus, strong axis9.89 in³162.1 cm³
rxRadius of gyration, strong axis2.37 in60.2 mm
IyMoment of inertia, weak axis5.88 in⁴244.7 cm⁴
ZyPlastic modulus, weak axis4.68 in³76.7 cm³
SySection modulus, weak axis2.47 in³40.5 cm³
ryRadius of gyration, weak axis1.05 in26.7 mm
JTorsional constant0.379 in⁴15.78 cm⁴
Metric designationMC150×26.8

Also known as

MC150×26.8

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.