MC7×19.1 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC7×19.1 is an AISC MC shapes: miscellaneous channels channel. It is 7 in (177.8 mm) deep with a 3.45 in (87.6 mm) flange, a 0.352 in (8.9 mm) web and an average flange thickness of 0.5 in (12.7 mm), and weighs 19.1 lb/ft (28.4 kg/m). Area 5.61 in² (3,619 mm²); centroid 1.08 in (27.4 mm) from the back of the web; Ix = 43.1 in⁴ (1,794 cm⁴), Sx = 12.3 in³ (201.6 cm³).

dDepth
177.8 mm7 in7 in177.8 mm
bfFlange width
87.6 mm3.45 in3.45 in87.6 mm
twWeb thickness
8.9 mm0.352 in0.352 in8.9 mm
tfFlange thickness (average)
12.7 mm0.5 in0.5 in12.7 mm

Drawing

87.6 mm3.45 in177.8 mm7 intf 12.7 mmtf 0.5 intw 8.9 mmtw 0.352 ine 27.4 mme 1.08 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC7×19.1 specifications

dDepth7 in177.8 mm
bfFlange width3.45 in87.6 mm
twWeb thickness0.352 in8.9 mm
tfFlange thickness (average)0.5 in12.7 mm
kDesign value1.13 in28.7 mm
kDetailing value1 1/8 in28.6 mm
WWeight19.1 lb/ft28.4 kg/m
AArea5.61 in²3,619 mm²
x̄Centroid from back of web1.08 in27.4 mm
eoShear centre from web1.15 in29.2 mm
IxMoment of inertia, strong axis43.1 in⁴1,794 cm⁴
ZxPlastic modulus, strong axis14.5 in³237.6 cm³
SxSection modulus, strong axis12.3 in³201.6 cm³
rxRadius of gyration, strong axis2.77 in70.4 mm
IyMoment of inertia, weak axis6.06 in⁴252.2 cm⁴
ZyPlastic modulus, weak axis4.85 in³79.5 cm³
SySection modulus, weak axis2.55 in³41.8 cm³
ryRadius of gyration, weak axis1.04 in26.4 mm
JTorsional constant0.407 in⁴16.94 cm⁴
Metric designationMC180×28.4

Also known as

MC180×28.4

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.