MC6×6.5 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC6×6.5 is an AISC MC shapes: miscellaneous channels channel. It is 6 in (152.4 mm) deep with a 1.85 in (47.0 mm) flange, a 0.155 in (3.9 mm) web and an average flange thickness of 0.291 in (7.4 mm), and weighs 6.5 lb/ft (9.7 kg/m). Area 1.95 in² (1,258 mm²); centroid 0.513 in (13.0 mm) from the back of the web; Ix = 11 in⁴ (457.9 cm⁴), Sx = 3.66 in³ (60 cm³).

dDepth
152.4 mm6 in6 in152.4 mm
bfFlange width
47.0 mm1.85 in1.85 in47.0 mm
twWeb thickness
3.9 mm0.155 in0.155 in3.9 mm
tfFlange thickness (average)
7.4 mm0.291 in0.291 in7.4 mm

Drawing

47.0 mm1.85 in152.4 mm6 intf 7.4 mmtf 0.291 intw 3.9 mmtw 0.155 ine 13.0 mme 0.513 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC6×6.5 specifications

dDepth6 in152.4 mm
bfFlange width1.85 in47.0 mm
twWeb thickness0.155 in3.9 mm
tfFlange thickness (average)0.291 in7.4 mm
kDesign value0.75 in19.0 mm
kDetailing value3/4 in19.0 mm
WWeight6.5 lb/ft9.7 kg/m
AArea1.95 in²1,258 mm²
x̄Centroid from back of web0.513 in13.0 mm
eoShear centre from web0.612 in15.5 mm
IxMoment of inertia, strong axis11 in⁴457.9 cm⁴
ZxPlastic modulus, strong axis4.28 in³70.1 cm³
SxSection modulus, strong axis3.66 in³60 cm³
rxRadius of gyration, strong axis2.38 in60.5 mm
IyMoment of inertia, weak axis0.565 in⁴23.5 cm⁴
ZyPlastic modulus, weak axis0.836 in³13.7 cm³
SySection modulus, weak axis0.422 in³6.9 cm³
ryRadius of gyration, weak axis0.54 in13.7 mm
JTorsional constant0.041 in⁴1.71 cm⁴
Metric designationMC150×9.7

Also known as

MC150×9.7

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.