2" NPT Cable Gland Thread & Hole Size

Cable Glands · NPT conduit entries (ASME B1.20.1)

A 2" NPT cable gland has a 2.375 in (60.33 mm) entry thread with 11.5 TPI (2.209 mm) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.

dThread outside diameter
60.33 mm2.375 in2.375 in60.33 mm
PThread pitch
2.209 mm11.5 TPI11.5 TPI2.209 mm

Drawing

⌀60.33 mm⌀2.375 inpitch 2.209 mm11.5 TPIenclosure wall
Gland with locknut through an enclosure wall. Thread and hole proportional; body and cap nut shape typical.Proportions shown, not to scale · Dimensions in mmDimensions in inches

2" NPT specifications

dThread outside diameter60.33 mm2.375 in
PThread pitch2.209 mm11.5 TPI
Tap drill (threaded entry)56.36 mm2.219 in

2" NPT: 2.375" (60.3 mm) thread, 11.5 threads per inch. Knockout punch sizes for 2" conduit are published as 2.416"–2.469" depending on the punch series, so the hole is not listed. Use the punch made for 2" conduit.

Thread dimensions

All Cable Glands sizes

Compare all 24 thread sizes in the Cable Glands chart →

Sources

  1. DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
  2. Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
  3. Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
  4. LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
  5. metric-bolt-torque.com: Cable gland sizes and entry holes
  6. Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
  7. ASME B1.20.1: Pipe threads, general purpose (inch), NPT

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.