PG48 Cable Gland Thread & Hole Size

Cable Glands · PG: steel conduit thread (DIN 40430)

A PG48 cable gland has a 59.3 mm (2.335 in) entry thread with 1.588 mm (16.0 TPI) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.

dThread outside diameter
59.3 mm2.335 in2.335 in59.3 mm
PThread pitch
1.588 mm16.0 TPI16.0 TPI1.588 mm
⌀Clearance hole
59.5–59.8 mm2.343–2.354 in2.343–2.354 in59.5–59.8 mm

Drawing

⌀59.3 mm⌀2.335 inpitch 1.588 mm16.0 TPIhole ⌀59.5–59.8 mmhole ⌀2.343–2.354 inenclosure wall
Gland with locknut through an enclosure wall. Thread and hole proportional; body and cap nut shape typical.Proportions shown, not to scale · Dimensions in mmDimensions in inches

PG48 specifications

dThread outside diameter59.3 mm2.335 in
PThread pitch1.588 mm16.0 TPI
⌀Clearance hole59.5–59.8 mm2.343–2.354 in

All Cable Glands sizes

Compare all 24 thread sizes in the Cable Glands chart →

Sources

  1. DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
  2. Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
  3. Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
  4. LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
  5. metric-bolt-torque.com: Cable gland sizes and entry holes
  6. Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
  7. ASME B1.20.1: Pipe threads, general purpose (inch), NPT

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.