Card Sizes: SD, microSD, CFexpress, SIM and Credit Card Dimensions

Card formats are fixed outlines: a microSD card is 15 × 11 × 1.0 mm, a nano-SIM 12.3 × 8.8 × 0.67 mm, and a credit card (ISO/IEC 7810 ID-1) 85.60 × 53.98 × 0.76 mm. This chart lists memory cards, SIM cards and identification cards with length, width and thickness, and draws them all to one scale.

18 sizesChecked 2026-11-155 sources
From a passport page (ID-3) to the 6 × 5 mm MFF2 embedded SIM, all drawn at the same scale.Drawn to scale

Size chartTap a size for its drawing and full specs

18 of 18
CardLLengthmminWWidthmminTThicknessmmin
Memory cards
SD card321.260240.9452.10.083
miniSD card21.50.846200.7871.40.055
microSD card150.591110.43310.039
CompactFlash Type I42.81.68536.41.4333.30.130
CompactFlash Type II42.81.68536.41.43350.197
CFexpress Type A281.102200.7872.80.110
CFexpress Type B38.51.51629.81.1733.80.150
CFexpress Type C742.913542.1264.80.189
XQD card38.51.51629.81.1733.80.150
Memory Stick PRO Duo311.220200.7871.60.063
SIM cards (UICC)
Full-size SIM (1FF)85.63.37053.982.1250.760.030
Mini-SIM (2FF)250.984150.5910.760.030
Micro-SIM (3FF)150.591120.4720.760.030
Nano-SIM (4FF)12.30.4848.80.3460.670.026
Embedded SIM (MFF2)60.23650.197—
Identification cards (ISO/IEC 7810)
ID-1 card (credit card)85.63.37053.982.1250.760.030
ID-2 card1054.134742.913—
ID-3 (passport)1254.921883.465—

How the card formats relate

SIM cards shrink from one outline. The original full-size SIM (1FF) is a credit-card-sized ID-1 card. The mini-SIM (2FF, 25 × 15 mm, identical to the ISO ID-000 format), micro-SIM (3FF, 15 × 12 mm) and nano-SIM (4FF, 12.3 × 8.8 mm) keep the same contact layout and cut away plastic around it; the nano-SIM is also thinner, 0.67 mm instead of 0.76 mm. That is why one plastic carrier often has all three sizes pre-punched, and why adapters work for going up a size. Cutting a larger SIM down is risky because the nano-SIM is thinner and the chip area is small.

Memory cards are not size-compatible across families, but adapters work downward: a microSD fits a full-size SD slot with a passive adapter, because SD and microSD share the same electrical interface. CFexpress Type B uses the XQD card outline (38.5 × 29.8 × 3.8 mm), and cameras that took XQD often accept CFexpress Type B after a firmware update. CFexpress Type A (20 × 28 × 2.8 mm) is a different, smaller card. The capacity labels SDHC, SDXC and SDUC do not change the physical size.

ID cards follow ISO/IEC 7810. ID-1 (85.60 × 53.98 mm, 0.76 mm thick, 3.18 mm corner radius) is the size of bank cards, driving licences and most ID cards; it is also called CR80. ID-2 (105 × 74 mm, A7 paper size) is used for some visas and older ID documents, and ID-3 (125 × 88 mm, B7) is the passport page size.

About Card Formats

The measurements in this chart are the nominal outlines from each format's specification. Real cards stay within tight tolerances (an ID-1 card's thickness is 0.76 ± 0.08 mm), so the nominal size is what slots, card readers, wallets and laser-cut holders are designed around. Labels and stickers add a few hundredths of a millimetre to thickness, which matters for microSD and nano-SIM slots.

Among memory cards, SD and microSD cover almost every camera, phone, drone, handheld console and single-board computer. CompactFlash (42.8 × 36.4 mm, Type I 3.3 mm and Type II 5.0 mm thick) was the professional camera card for two decades and is now legacy. Its successor in high-end cameras is CFexpress: Type B in most full-frame bodies, Type A in some Sony cameras, and Type C (54 × 74 × 4.8 mm) defined for industrial use. Memory Stick PRO Duo (31 × 20 × 1.6 mm) was Sony's format for cameras and the PSP.

The MFF2 embedded SIM is a 6 × 5 mm chip package soldered to a circuit board, used in IoT devices, cars and some phones. An eSIM is a function (a downloadable profile) rather than a size; phones with eSIM usually have an MFF2 or an even smaller chip-scale package inside.

Which card does my device take?

Look at the slot: a phone tray with a single small recess takes a nano-SIM; tablets and older phones may take micro-SIM. For memory, a slot about 24 mm wide is full-size SD; about 11 mm is microSD. Camera specs say "CFexpress Type B" or "Type A" explicitly. A CFexpress Type A card does not fit a Type B slot, and some cameras have dual slots that accept both CFexpress Type A and SD.

Questions

What is the size of a credit card in mm and inches?

85.60 × 53.98 mm (3.370 × 2.125 in), 0.76 mm (0.030 in) thick, with corners rounded to a 3.18 mm radius. This is the ISO/IEC 7810 ID-1 format, also used for ID cards and driving licences.

What are the dimensions of a nano-SIM?

12.3 × 8.8 mm and 0.67 mm thick. A micro-SIM is 15 × 12 × 0.76 mm and a mini-SIM 25 × 15 × 0.76 mm.

How big is a microSD card?

15 × 11 × 1.0 mm, about the size of a fingernail. A full-size SD card is 32 × 24 × 2.1 mm.

Is CFexpress Type B the same size as XQD?

Yes. Both are 38.5 × 29.8 × 3.8 mm, and many XQD cameras accept CFexpress Type B cards after a firmware update. CFexpress Type A is smaller (20 × 28 × 2.8 mm) and not interchangeable.

Can I cut a SIM card down to nano size?

It can work from micro to nano with a precise cutter, but the nano-SIM is 0.09 mm thinner, so a cut-down card can be loose or jam in some trays. Most carriers supply a free replacement SIM, or a triple-cut card with all three sizes pre-punched.

What size is a passport?

A passport booklet and its data page follow ISO/IEC 7810 ID-3: 125 × 88 mm (4.921 × 3.465 in), the size of B7 paper.

Sources

  1. SD Association: SD standard overview (SD, miniSD, microSD physical formats)
  2. CompactFlash Association: CFexpress 2.0 (Type A 20 × 28 × 2.8 mm, Type B 38.5 × 29.8 × 3.8 mm, Type C 54 × 74 × 4.8 mm) and CF 6.0
  3. ETSI TS 102 221: UICC-Terminal interface (1FF–4FF dimensions); ETSI TS 102 671: MFF2 machine-to-machine form factor
  4. ISO/IEC 7810:2019, Identification cards, physical characteristics (ID-1, ID-2, ID-3, ID-000)
  5. Lexar: CFexpress card guide (Type A/B dimensions)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.