70 mm fan: Hole Spacing and Dimensions

Case Fan Sizes

A 70 mm fan has a 70 mm (2.76 in) square frame. Mounting-hole spacing, centre to centre: 60 mm (2.36 in). Common frame thicknesses are 15, 25 mm. Typical use: Older low-profile CPU coolers, small enclosures.

AFrame size
70 mm2.76 in2.76 in70 mm
BHole spacing (centre to centre)
60 mm2.36 in2.36 in60 mm

Drawing

60 mm2.36 in60 mm2.36 in70 mm2.76 in
Frame and hole spacing in proportion; blades, hub and hole size indicative.Drawn to scale · Dimensions in mmDimensions in inches

70 mm fan specifications

AFrame size70 mm2.76 in
BHole spacing (centre to centre)60 mm2.36 in
Common thicknesses15, 25 mm
Typical useOlder low-profile CPU coolers, small enclosures

3-pin and 4-pin fan connector pinout

PinSignalFunctionTypical wire colour
1GNDGroundblack
2+12 VSupply (on 3-pin fans the board varies this voltage to control speed)red or yellow
3Sense (tach)Speed signal, 2 pulses per revolutionyellow or green
4PWM control25 kHz PWM speed control (4-pin fans only)blue

Next smaller and larger fan

All fan sizes

All 10 fan sizes in the Case Fan Sizes chart →

Sources

  1. Arctic: Fan mounting hole pattern drawings (40 mm, 120 mm, 140 mm)
  2. Noctua: 120 mm and 140 mm fan mounting (NF-P14 / NF-A14 dual hole pattern)
  3. Intel: 4-Wire Pulse Width Modulation (PWM) Controlled Fans specification, rev. 1.3
  4. Voltcave: How to measure a PC fan's size (fan size vs hole spacing table)
  5. Wikipedia: Computer fan (fan size vs mounting hole spacing table, connectors)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.