UPE 80 Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · UPE: European channels, parallel flanges

UPE 80 (UPE: European channels, parallel flanges) is 80 mm (3.150 in) deep with a 50 mm (1.969 in) flange, a 4 mm (0.157 in) web and a 7 mm (0.276 in) flange. Mass 7.9 kg/m (5.309 lb/ft), area 10.1 cm² (1.566 in²); strong-axis I = 107 cm⁴ (2.57 in⁴), Wel = 26.8 cm³ (1.64 in³).

hDepth
80 mm3.150 in3.150 in80 mm
bFlange width
50 mm1.969 in1.969 in50 mm
twWeb thickness
4 mm0.157 in0.157 in4 mm
tfFlange thickness
7 mm0.276 in0.276 in7 mm

Drawing

50 mm1.969 in80 mm3.150 intf 7 mmtf 0.276 intw 4 mmtw 0.157 ine 1.82 cme 0.717 in
Drawn to scale · Dimensions in mmDimensions in inches

UPE 80 specifications

hDepth80 mm3.150 in
bFlange width50 mm1.969 in
twWeb thickness4 mm0.157 in
tfFlange thickness7 mm0.276 in
r1Root radius10 mm0.394 in
GMass7.9 kg/m5.309 lb/ft
AArea10.1 cm²1.566 in²
eCentroid from back of web1.82 cm0.717 in
IyMoment of inertia, strong axis107 cm⁴2.57 in⁴
Wel,yElastic modulus, strong axis26.8 cm³1.64 in³
Wpl,yPlastic modulus, strong axis31.2 cm³1.9 in³
iyRadius of gyration, strong axis3.26 cm1.283 in
IzMoment of inertia, weak axis25.5 cm⁴0.61 in⁴
Wel,zElastic modulus, weak axis8 cm³0.49 in³
izRadius of gyration, weak axis1.59 cm0.626 in

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.