UPN 80 Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · UPN: European standard channels, tapered flanges (EN 10279, DIN 1026-1)

UPN 80 (UPN: European standard channels, tapered flanges, EN 10279, DIN 1026-1) is 80 mm (3.150 in) deep with a 45 mm (1.772 in) flange, a 6 mm (0.236 in) web and a 8 mm (0.315 in) flange. Mass 8.6 kg/m (5.779 lb/ft), area 11 cm² (1.705 in²); strong-axis I = 106 cm⁴ (2.55 in⁴), Wel = 26.5 cm³ (1.62 in³).

hDepth
80 mm3.150 in3.150 in80 mm
bFlange width
45 mm1.772 in1.772 in45 mm
twWeb thickness
6 mm0.236 in0.236 in6 mm
tfFlange thickness
8 mm0.315 in0.315 in8 mm

Drawing

45 mm1.772 in80 mm3.150 intf 8 mmtf 0.315 intw 6 mmtw 0.236 inr1 8 mmr1 0.315 in
Drawn to scale · Dimensions in mmDimensions in inches

UPN 80 specifications

hDepth80 mm3.150 in
bFlange width45 mm1.772 in
twWeb thickness6 mm0.236 in
tfFlange thickness8 mm0.315 in
r1Root radius8 mm0.315 in
r2Toe radius4 mm0.157 in
GMass8.6 kg/m5.779 lb/ft
AArea11 cm²1.705 in²
IyMoment of inertia, strong axis106 cm⁴2.55 in⁴
Wel,yElastic modulus, strong axis26.5 cm³1.62 in³
Wpl,yPlastic modulus, strong axis32.3 cm³1.97 in³
iyRadius of gyration, strong axis3.1 cm1.220 in
IzMoment of inertia, weak axis19.4 cm⁴0.47 in⁴
Wel,zElastic modulus, weak axis6 cm³0.37 in³
izRadius of gyration, weak axis1.33 cm0.524 in

Also known as

U80UNP80

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.