UPN 140 Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · UPN: European standard channels, tapered flanges (EN 10279, DIN 1026-1)
UPN 140 (UPN: European standard channels, tapered flanges, EN 10279, DIN 1026-1) is 140 mm (5.512 in) deep with a 60 mm (2.362 in) flange, a 7 mm (0.276 in) web and a 10 mm (0.394 in) flange. Mass 16 kg/m (10.752 lb/ft), area 20.4 cm² (3.162 in²); strong-axis I = 605 cm⁴ (14.54 in⁴), Wel = 86.4 cm³ (5.27 in³).
- hDepth
- 140 mm5.512 in5.512 in140 mm
- bFlange width
- 60 mm2.362 in2.362 in60 mm
- twWeb thickness
- 7 mm0.276 in0.276 in7 mm
- tfFlange thickness
- 10 mm0.394 in0.394 in10 mm
Drawing
UPN 140 specifications
| hDepth | 140 mm5.512 in |
|---|---|
| bFlange width | 60 mm2.362 in |
| twWeb thickness | 7 mm0.276 in |
| tfFlange thickness | 10 mm0.394 in |
| r1Root radius | 10 mm0.394 in |
| r2Toe radius | 5 mm0.197 in |
| GMass | 16 kg/m10.752 lb/ft |
| AArea | 20.4 cm²3.162 in² |
| IyMoment of inertia, strong axis | 605 cm⁴14.54 in⁴ |
| Wel,yElastic modulus, strong axis | 86.4 cm³5.27 in³ |
| Wpl,yPlastic modulus, strong axis | 103 cm³6.29 in³ |
| iyRadius of gyration, strong axis | 5.45 cm2.146 in |
| IzMoment of inertia, weak axis | 62.7 cm⁴1.51 in⁴ |
| Wel,zElastic modulus, weak axis | 15 cm³0.92 in³ |
| izRadius of gyration, weak axis | 1.75 cm0.689 in |
Also known as
U140UNP140
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.