ATX 24-pin Pinout
Connector Pinouts · PC power and storage
The ATX 24-pin has 24 contacts. Specification: Intel ATX12V / ATX 3.x Design Guide; Molex Mini-Fit Jr. housing. The drawing shows the connector face with every pin colour-coded by function; the table below lists each pin's signal and description.
- Pins
- 24
Drawing
ATX 24-pin specifications
| Pins | 24 |
|---|---|
| Standard | Intel ATX12V / ATX 3.x Design Guide; Molex Mini-Fit Jr. housing |
| Contact pitch | 4.2 mm0.165 in |
| Power | +3.3 V, +5 V, +12 V, −12 V, +5 VSB |
| Drawing view | Mating face, schematic |
ATX 24-pin pin assignment
| Pin | Signal | Function | Wire |
|---|---|---|---|
| 1 | +3.3 V | +3.3 V | orange |
| 2 | +3.3 V | +3.3 V | orange |
| 3 | COM | Ground | black |
| 4 | +5 V | +5 V | red |
| 5 | COM | Ground | black |
| 6 | +5 V | +5 V | red |
| 7 | COM | Ground | black |
| 8 | PWR_OK | Power good: goes high when the outputs are stable | grey |
| 9 | +5 VSB | +5 V standby, on whenever the PSU has mains power | purple |
| 10 | +12 V | +12 V | yellow |
| 11 | +12 V | +12 V (one of the four pins added to the 20-pin connector) | yellow |
| 12 | +3.3 V | +3.3 V (added in 24-pin) | orange |
| 13 | +3.3 V | +3.3 V; often with a brown 3.3 V remote-sense wire | orange |
| 14 | −12 V | −12 V | blue |
| 15 | COM | Ground | black |
| 16 | PS_ON# | Power on: pull to ground to switch the PSU on | green |
| 17 | COM | Ground | black |
| 18 | COM | Ground | black |
| 19 | COM | Ground | black |
| 20 | NC | Not connected (−5 V, white wire, in ATX before 1.3) | |
| 21 | +5 V | +5 V | red |
| 22 | +5 V | +5 V | red |
| 23 | +5 V | +5 V (added in 24-pin) | red |
| 24 | COM | Ground (added in 24-pin) | black |
Pin 13 sits opposite pin 1; the four pins added when ATX12V 2.0 went from 20 to 24 pins are 11, 12, 23 and 24, which is why a 20+4 plug splits there. To start a PSU on the bench, connect PS_ON# (pin 16, green) to any ground (black), with a load on the supply and never while it is in a running PC.
Related connectors
All connector pinouts
Sources
- USB-IF: USB Type-C Cable and Connector Specification, Release 2.x
- USB-IF: Universal Serial Bus 2.0 / 3.2 Specifications
- HDMI Licensing Administrator: HDMI Specification 2.1 (connector and pin assignment)
- VESA: DisplayPort Standard
- ANSI/TIA-568: Commercial Building Telecommunications Cabling Standard (T568A/T568B)
- Intel: ATX Version 3.1 Multi Rail Desktop Platform Power Supply Design Guide
- PCI-SIG: PCI Express Card Electromechanical Specification 5.1
- NVIDIA: Power guidelines for professional GPUs (PCIe 6/8-pin pinout, DA-07261)
- SATA-IO: Serial ATA Revision 3.x
- Apple Lightning pin assignment (reverse engineered): nyansatan.github.io/lightning
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.