Connector Pinouts: USB-C, HDMI, RJ45, ATX and More

Pin-by-pin assignments for the connectors you meet on computers, phones, networks and audio gear, with a drawing of each connector face. Every pinout states the view it is drawn from. The most common wiring mistake is reading a receptacle diagram as if it were the plug, which mirrors left and right.

26 connectorsChecked 2026-11-1510 sources
HDMI13.9 × 4.45USB-A12 × 4.5USB-B8.45 × 7.78USB-C8.34 × 2.56Micro-B6.85 × 1.8Mini-B6.85 × 3Lightning6.7 × 1.5
Nominal widths × heights in mm: plug sizes for HDMI, USB-A, USB-B and Lightning, receptacle openings for USB-C, Micro-B and Mini-B.Drawn to scale · Dimensions in mmDimensions in inches

ConnectorsTap a connector for its pinout

26 of 26 connectors
ConnectorPinsWWidthmminHHeightmminContact pitchmminRated powerWStandard
USB and phone connectors
USB Type-C248.340.3282.560.1010.50.020—USB Type-C Cable and Connector Specification (USB-IF); IEC 62680-1-3
USB Type-A (USB 2.0)4120.4724.50.177——USB 2.0 Specification (USB-IF)
USB 3.x Type-A9120.4724.50.177——USB 3.2 Specification (USB-IF)
USB Type-B (USB 2.0)48.450.3337.780.306——USB 2.0 Specification (USB-IF)
USB Mini-B56.850.27030.118——USB 2.0 Specification, Mini-B ECN (USB-IF)
USB Micro-B56.850.2701.80.071——Universal Serial Bus Micro-USB Cables and Connectors Specification (USB-IF)
Apple Lightning86.70.2641.50.059——Apple proprietary (MFi licensing); numbering as published from reverse engineering
Video
HDMI Type A1913.90.5474.450.175——HDMI Specification (HDMI Licensing Administrator)
DisplayPort20————VESA DisplayPort Standard
VGA (DE-15)15————IBM VGA (1987); VESA DDC (EDID over pins 12/15)
Network and serial
RJ45 T568B8——1.020.040—ANSI/TIA-568 (T568B), 8P8C modular connector (IEC 60603-7)
RJ45 T568A8——1.020.040—ANSI/TIA-568 (T568A), 8P8C modular connector (IEC 60603-7)
RJ11 / RJ14 (6P4C)6——1.020.040—USOC RJ11 (6P2C, one line) / RJ14 (6P4C, two lines); FCC 47 CFR Part 68
DE-9 RS-232 (DB9)9——2.770.109—TIA-574 (DE-9 for EIA/TIA-232)
PC power and storage
ATX 24-pin24——4.20.165—Intel ATX12V / ATX 3.x Design Guide; Molex Mini-Fit Jr. housing
EPS 8-pin CPU8——4.20.165—SSI EPS12V; Molex Mini-Fit Jr. housing
PCIe 6-pin6——4.20.16575PCI Express Card Electromechanical Specification (PCI-SIG); Mini-Fit Jr. type housing
PCIe 8-pin (6+2)8——4.20.165150PCI Express Card Electromechanical Specification (PCI-SIG); Mini-Fit Jr. type housing
12V-2x6 / 12VHPWR16——30.118600PCIe CEM 5.1 / Intel ATX 3.1 (12V-2x6); PCIe CEM 5.0 / ATX 3.0 (12VHPWR); Micro-Fit type 3.0 mm housing
SATA data (7-pin)7——1.270.050—Serial ATA Revision 3.x (SATA-IO)
SATA power (15-pin)15——1.270.050—Serial ATA Revision 3.x (SATA-IO)
Molex 4-pin peripheral4——5.080.200—AMP Mate-N-Lok (1-480424-0) / Molex 8981 housing
Audio
3.5 mm TRS (stereo)3————IEC 60603-11
3.5 mm TRRS (CTIA)4————CTIA / AHJ (American Headset Jack)
3.5 mm TRRS (OMTP)4————OMTP (Open Mobile Terminal Platform)
XLR 3-pin3————IEC 61076-2-103; AES14 (pin 2 hot)

How to read a pinout

Plug or receptacle? A plug and the receptacle it mates with are mirror images. A drawing of the port on a device (receptacle, socket, jack) seen from the front has pin 1 on the opposite side to a drawing of the cable plug seen from its face. Each drawing here says which view it shows. When you solder to the back of a connector you see the pins mirrored again.

Colours in the drawings show the function of each pin: red power, grey ground, blue high-speed data, green low-speed signals, amber configuration and sense lines, purple audio, dashed shield or not connected. The Wire column shows the insulation colour where a standard fixes it: T568A/B pairs, ATX and SATA power leads, USB cables. Many cheap cables ignore cable colours, so measure before you trust them.

Pin numbers are often moulded next to the contacts. On D-sub, Mini-Fit (ATX, PCIe) and XLR connectors look for tiny numbers on the insulator; on modular (RJ45) plugs count from the left with the contacts facing you and the latch away.

Hover over or tap a row of the pin table to find the pin in the drawing, and tap a pin to jump to its row.

About Connector Pinouts

Each connector page gives the pin count, the governing specification, nominal dimensions where the standard defines them, the maximum data rate and power, and the full pin table. Pin names are the ones used in the specification (VBUS, CC1, TMDS Data2+, PS_ON#), so they match datasheets and schematics.

USB-C is the connector most people look up. Its receptacle has 24 contacts in two rows of 12, arranged point-symmetrically so the plug works either way up: VBUS and ground sit at the same positions on both rows, the USB 2.0 pair D+/D− appears twice (A6/A7 and B6/B7), and the two CC pins tell each end which way round the plug is. A simple USB 2.0 Type-C cable uses only VBUS, GND, D+, D− and CC.

For PC power connectors the wire colours are standardised in the Intel design guides: yellow +12 V, red +5 V, orange +3.3 V, black ground, purple +5 V standby, green PS_ON#, grey PWR_OK, blue −12 V. Modular PSU cables are not standardised at the PSU end, so never mix modular cables between PSU brands or even models.

Dimensions are nominal values from the specifications. Where only the plug or only the receptacle is commonly specified, the Size refers to row says which one.

USB-C power and cable types

Without negotiation a USB-C port supplies 5 V. A sink advertises itself through a pull-down resistor on CC (5.1 kΩ); the source signals default USB current, 1.5 A or 3 A by the value of its pull-up. Above that, USB Power Delivery negotiates 9, 15, 20 V and, with PD 3.1 Extended Power Range, 28, 36 and 48 V, up to 240 W. More than 3 A needs a 5 A cable with an e-marker chip, powered from VCONN on the unused CC wire.

PCIe and 12V-2x6 power levels

A PCIe 6-pin connector is rated 75 W and an 8-pin 150 W; the slot itself supplies up to 75 W. The 16-pin 12V-2x6 (and its predecessor 12VHPWR) carries up to 600 W on six +12 V and six ground contacts at 3.0 mm pitch. The PSU cable codes its capability on SENSE0/SENSE1: both grounded 600 W, SENSE0 open and SENSE1 grounded 450 W, SENSE0 grounded and SENSE1 open 300 W, both open 150 W on 12VHPWR (12V-2x6: the card must not draw high power).

12V-2x6 keeps the 12VHPWR pin assignment and mates with 12VHPWR plugs; it shortens the sense pins and lengthens the power pins so the card only sees the sense signals when the plug is fully seated.

Ethernet: T568A or T568B?

Both are equally good electrically; they only swap the orange and green pairs. Use one scheme at both ends of a cable for a straight-through cable. A cable with T568A at one end and T568B at the other is a crossover cable, needed only for old 10/100 equipment without Auto-MDIX. T568B is more common in North American commercial installations; T568A is preferred by the US federal government and in many homes.

Questions

How many pins does USB-C have?

The USB-C receptacle has 24 contacts: two rows of 12 (A1–A12 and B1–B12). A full-featured USB-C cable uses most of them; a USB 2.0-only cable connects just VBUS, GND, D+, D− and CC, and the plug itself carries only one D+/D− pair.

Which wires are used in a 100 Mbit/s Ethernet cable?

Pins 1, 2, 3 and 6: the orange and green pairs. Gigabit Ethernet and faster use all eight wires. Unused pairs can carry Power over Ethernet (mode B).

What do the wire colours in a PC power supply mean?

Yellow +12 V, red +5 V, orange +3.3 V, black ground, purple +5 V standby, green PS_ON#, grey PWR_OK, blue −12 V. These are fixed in the Intel ATX design guide for the motherboard and peripheral connectors.

Is pin 1 on the left or right?

It depends on the view. Plug and receptacle are mirror images, and the back (solder side) of a connector is mirrored again. Every drawing on this site states its view; look for the pin numbers moulded on the connector to be sure.

What is the difference between CTIA and OMTP headsets?

Both are 3.5 mm TRRS: tip left, ring 1 right. CTIA (almost all current phones) has ground on ring 2 and microphone on the sleeve; OMTP swaps those two. Using the wrong type makes voices disappear from music until you press the mic button.

How much power can a PCIe cable deliver?

6-pin: 75 W. 8-pin: 150 W. 12V-2x6 / 12VHPWR: up to 600 W, depending on how the cable sets SENSE0 and SENSE1. The PCIe slot adds up to 75 W.

Sources

  1. USB-IF: USB Type-C Cable and Connector Specification, Release 2.x
  2. USB-IF: Universal Serial Bus 2.0 / 3.2 Specifications
  3. HDMI Licensing Administrator: HDMI Specification 2.1 (connector and pin assignment)
  4. VESA: DisplayPort Standard
  5. ANSI/TIA-568: Commercial Building Telecommunications Cabling Standard (T568A/T568B)
  6. Intel: ATX Version 3.1 Multi Rail Desktop Platform Power Supply Design Guide
  7. PCI-SIG: PCI Express Card Electromechanical Specification 5.1
  8. NVIDIA: Power guidelines for professional GPUs (PCIe 6/8-pin pinout, DA-07261)
  9. SATA-IO: Serial ATA Revision 3.x
  10. Apple Lightning pin assignment (reverse engineered): nyansatan.github.io/lightning

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.