PCIe 6-pin Pinout
Connector Pinouts · PC power and storage
The PCIe 6-pin has 6 contacts. Specification: PCI Express Card Electromechanical Specification (PCI-SIG); Mini-Fit Jr. type housing. The drawing shows the connector face with every pin colour-coded by function; the table below lists each pin's signal and description.
- Pins
- 6
- Rated power
- 75 W
Drawing
PCIe 6-pin specifications
| Pins | 6 |
|---|---|
| Standard | PCI Express Card Electromechanical Specification (PCI-SIG); Mini-Fit Jr. type housing |
| Contact pitch | 4.2 mm0.165 in |
| Power | +12 V |
| Rated power | 75 W |
| Drawing view | Mating face, schematic |
PCIe 6-pin pin assignment
| Pin | Signal | Function | Wire |
|---|---|---|---|
| 1 | +12 V | +12 V | yellow |
| 2 | +12 V | +12 V (listed as not connected in early CEM revisions; PSUs wire it to 12 V) | yellow |
| 3 | +12 V | +12 V | yellow |
| 4 | COM | Ground | black |
| 5 | Sense | Ground in the cable: tells the card a 6-pin cable is plugged in | black |
| 6 | COM | Ground | black |
Pin 5 is the sense pin: it is grounded in the cable so the card knows a 6-pin cable is present. A 6-pin plug can go into an 8-pin socket on many cards, but the card then limits itself to 75 W or refuses to start.
Related connectors
All connector pinouts
Sources
- USB-IF: USB Type-C Cable and Connector Specification, Release 2.x
- USB-IF: Universal Serial Bus 2.0 / 3.2 Specifications
- HDMI Licensing Administrator: HDMI Specification 2.1 (connector and pin assignment)
- VESA: DisplayPort Standard
- ANSI/TIA-568: Commercial Building Telecommunications Cabling Standard (T568A/T568B)
- Intel: ATX Version 3.1 Multi Rail Desktop Platform Power Supply Design Guide
- PCI-SIG: PCI Express Card Electromechanical Specification 5.1
- NVIDIA: Power guidelines for professional GPUs (PCIe 6/8-pin pinout, DA-07261)
- SATA-IO: Serial ATA Revision 3.x
- Apple Lightning pin assignment (reverse engineered): nyansatan.github.io/lightning
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.