SATA data (7-pin) Pinout

Connector Pinouts · PC power and storage

The SATA data (7-pin) has 7 contacts. Specification: Serial ATA Revision 3.x (SATA-IO). The drawing shows the connector face with every pin colour-coded by function; the table below lists each pin's signal and description.

Pins
7

Drawing

1 · GND1 GND2 · A+2 A+3 · A−3 A−4 · GND4 GND5 · B−5 B−6 · B+6 B+7 · GND7 GNDGroundData / video
Schematic: pin order and grouping, not the physical layout.Proportions shown, not to scale

SATA data (7-pin) specifications

Pins7
StandardSerial ATA Revision 3.x (SATA-IO)
Contact pitch1.27 mm0.050 in
Max. data rate6 Gbit/s (SATA III); 3 Gbit/s (SATA II); 1.5 Gbit/s (SATA I)
Drawing viewSchematic pin order

SATA data (7-pin) pin assignment

PinSignalFunctionWire
1GNDGround (longer pin, mates first)
2A+Differential pair A, positive (host transmit)
3A−Differential pair A, negative
4GNDGround
5B−Differential pair B, negative (host receive)
6B+Differential pair B, positive
7GNDGround

Seven contacts in an L-shaped housing: three grounds and two differential pairs. The ground pins are longer so they mate first. The same cable works for SATA I, II and III; length is limited to 1 m.

Related connectors

All connector pinouts

All 26 connectors in the Connector Pinouts chart →

Sources

  1. USB-IF: USB Type-C Cable and Connector Specification, Release 2.x
  2. USB-IF: Universal Serial Bus 2.0 / 3.2 Specifications
  3. HDMI Licensing Administrator: HDMI Specification 2.1 (connector and pin assignment)
  4. VESA: DisplayPort Standard
  5. ANSI/TIA-568: Commercial Building Telecommunications Cabling Standard (T568A/T568B)
  6. Intel: ATX Version 3.1 Multi Rail Desktop Platform Power Supply Design Guide
  7. PCI-SIG: PCI Express Card Electromechanical Specification 5.1
  8. NVIDIA: Power guidelines for professional GPUs (PCIe 6/8-pin pinout, DA-07261)
  9. SATA-IO: Serial ATA Revision 3.x
  10. Apple Lightning pin assignment (reverse engineered): nyansatan.github.io/lightning

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.