USB Type-C Pinout
Connector Pinouts · USB and phone connectors
The USB Type-C has 24 contacts. Specification: USB Type-C Cable and Connector Specification (USB-IF); IEC 62680-1-3. The drawing shows the connector face with every pin colour-coded by function; the table below lists each pin's signal and description.
- Pins
- 24
- WWidth
- 8.34 mm0.328 in0.328 in8.34 mm
- HHeight
- 2.56 mm0.101 in0.101 in2.56 mm
Drawing
USB Type-C specifications
| Pins | 24 |
|---|---|
| Standard | USB Type-C Cable and Connector Specification (USB-IF); IEC 62680-1-3 |
| WWidth | 8.34 mm0.328 in |
| HHeight | 2.56 mm0.101 in |
| Size refers to | Receptacle opening |
| Contact pitch | 0.5 mm0.020 in |
| Max. data rate | 80 Gbit/s (USB4 v2.0); 40 Gbit/s (USB4, Thunderbolt 4); 20 Gbit/s (USB 3.2 Gen 2×2) |
| Power | 5 V default; up to 20 V × 5 A = 100 W (USB PD); 48 V × 5 A = 240 W (USB PD 3.1 EPR) |
| Drawing view | Looking into the receptacle (port) |
USB Type-C pin assignment
| Pin | Signal | Function | Wire |
|---|---|---|---|
| A1 | GND | Ground | black |
| A2 | TX1+ | SuperSpeed transmit pair 1, positive | |
| A3 | TX1− | SuperSpeed transmit pair 1, negative | |
| A4 | VBUS | Bus power | red |
| A5 | CC1 | Configuration channel: plug orientation, current advertisement, USB PD messages | |
| A6 | D+ | USB 2.0 data, positive | green |
| A7 | D− | USB 2.0 data, negative | white |
| A8 | SBU1 | Sideband use (e.g. DisplayPort AUX in Alt Mode) | |
| A9 | VBUS | Bus power | red |
| A10 | RX2− | SuperSpeed receive pair 2, negative | |
| A11 | RX2+ | SuperSpeed receive pair 2, positive | |
| A12 | GND | Ground | black |
| B1 | GND | Ground | black |
| B2 | TX2+ | SuperSpeed transmit pair 2, positive | |
| B3 | TX2− | SuperSpeed transmit pair 2, negative | |
| B4 | VBUS | Bus power | red |
| B5 | CC2 | Configuration channel (the plug carries VCONN here to power an e-marker) | |
| B6 | D+ | USB 2.0 data, positive (joined to A6 in the device) | green |
| B7 | D− | USB 2.0 data, negative (joined to A7 in the device) | white |
| B8 | SBU2 | Sideband use | |
| B9 | VBUS | Bus power | red |
| B10 | RX1− | SuperSpeed receive pair 1, negative | |
| B11 | RX1+ | SuperSpeed receive pair 1, positive | |
| B12 | GND | Ground | black |
Looking into the receptacle, row A is on top with A1 at the left; row B is below with B12 under A1, so the pattern is the same after a 180° turn. The plug has only one D+/D− pair and one CC wire; the other CC position (B5) carries VCONN for the cable's e-marker. Receptacle opening 8.34 × 2.56 mm; plug 8.25 × 2.40 mm. USB 2.0-only devices connect just A4/A9/B4/B9 (VBUS), A1/A12/B1/B12 (GND), D+/D− and CC1/CC2, and they need their own 5.1 kΩ pull-down on each CC pin, or a USB-C charger will not switch on VBUS.
Also known as
Related connectors
All connector pinouts
Sources
- USB-IF: USB Type-C Cable and Connector Specification, Release 2.x
- USB-IF: Universal Serial Bus 2.0 / 3.2 Specifications
- HDMI Licensing Administrator: HDMI Specification 2.1 (connector and pin assignment)
- VESA: DisplayPort Standard
- ANSI/TIA-568: Commercial Building Telecommunications Cabling Standard (T568A/T568B)
- Intel: ATX Version 3.1 Multi Rail Desktop Platform Power Supply Design Guide
- PCI-SIG: PCI Express Card Electromechanical Specification 5.1
- NVIDIA: Power guidelines for professional GPUs (PCIe 6/8-pin pinout, DA-07261)
- SATA-IO: Serial ATA Revision 3.x
- Apple Lightning pin assignment (reverse engineered): nyansatan.github.io/lightning
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.