1/4" Copper Tube Size

Copper Tube · ASTM B88: US copper water tube (nominal inch sizes)

1/4" copper tube (ASTM B88: US copper water tube, nominal inch sizes) has an outside diameter of 9.53 mm (0.375 in). Wall thickness, inside diameter and weight depend on the tube type and are listed below; the drawing shows the cross-section to scale.

ODOutside diameter
9.53 mm0.375 in0.375 in9.53 mm
tWall, Type L
0.76 mm0.030 in0.030 in0.76 mm
IDInside diameter, Type L
8 mm0.315 in0.315 in8 mm
Weight, Type L
0.188 kg/m0.126 lb/ft0.126 lb/ft0.188 kg/m

Drawing

⌀9.53 mm⌀0.375 in⌀8 mm⌀0.315 int = 0.76 mmt = 0.030 inSection shown: Type L
Wall by type (enlarged)L0.76 mm0.030 inK0.89 mm0.035 in
Hatched ring: Type L wall; dashed circle: Type K bore. Bar view: every type made in this size, enlarged to one scale.Drawn to scale · Dimensions in mmDimensions in inches

1/4" specifications

ODOutside diameter9.53 mm0.375 in
tWall, Type K0.89 mm0.035 in
tWall, Type L0.76 mm0.030 in
IDInside diameter, Type K7.75 mm0.305 in
IDInside diameter, Type L8 mm0.315 in
Weight, Type K0.145 lb/ft0.216 kg/m
Weight, Type L0.126 lb/ft0.188 kg/m

1/4" water tube is 3/8" (0.375 in) outside, the same OD as 3/8" ACR refrigeration tube. Type M is not made in this size.

Steel/PVC pipe of the same nominal size (larger OD)

All Copper Tube sizes

Compare all 19 sizes in the Copper Tube chart →

Sources

  1. ASTM B88: Standard Specification for Seamless Copper Water Tube
  2. Copper Development Association: The Copper Tube Handbook (Table 14.3, dimensions and weights)
  3. EN 1057:2006+A1:2010, Copper and copper alloys, seamless round copper tubes for water and gas in sanitary and heating applications

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.