NU311 Cylindrical Roller Bearing Dimensions
Cylindrical Roller Bearings · 3 series (NU 3xx), medium
The NU311 is a single row cylindrical roller bearing, type NU: outer ring ribs (3 series, NU 3xx, medium): 55 mm (2.165 in) bore, 120 mm (4.724 in) outside diameter, 29 mm (1.142 in) wide.
- dBore diameter
- 55 mm2.165 in2.165 in55 mm
- DOutside diameter
- 120 mm4.724 in4.724 in120 mm
- BWidth
- 29 mm1.142 in1.142 in29 mm
- FRaceway diameter, inner ring (F)
- 70.5 mm2.776 in2.776 in70.5 mm
Drawing
NU311 specifications
| Type | NU: outer ring ribs |
|---|---|
| dBore diameter | 55 mm2.165 in |
| DOutside diameter | 120 mm4.724 in |
| BWidth | 29 mm1.142 in |
| FRaceway diameter, inner ring (F) | 70.5 mm2.776 in |
Also known as
NU311ENU311ECNU311ECPNU311ECJNU311ECMNU311-E-XL-TVP2NU311-E-XL-M1NU311EWNU311ETNU311EGNU311ETVP2NU311M
Same size in the other types
Same type, other series with a 55 mm bore
Same 55 mm bore in other bearing types
6011Ball Bearings6211Ball Bearings6311Ball Bearings7011Angular Contact Bearings7211Angular Contact Bearings7311Angular Contact Bearings30211Tapered Roller Bearings30311Tapered Roller Bearings31311Tapered Roller Bearings21311Spherical Roller Bearings22211Spherical Roller Bearings22311Spherical Roller Bearings1211Self-Aligning Ball Bearings1311Self-Aligning Ball Bearings2211Self-Aligning Ball Bearings51111Thrust Ball Bearings51211Thrust Ball Bearings51311Thrust Ball BearingsNA4911Needle Roller BearingsUC211Bearing Units (UCP, UCF, UCFL)
All Cylindrical Roller Bearings sizes
Compare all 238 sizes in the Cylindrical Roller Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 5412-1: Cylindrical roller bearings, single row (NU, NJ, NUP, N)
- SKF: Single row cylindrical roller bearings, product tables (NU 2.. ECP, NJ 3.. ECP …)
- Schaeffler (FAG) medias: NU2..-E-XL, NJ3..-E-XL, N2..-E-XL (raceway diameters E, F)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.