7311 Angular Contact Bearing Dimensions
Angular Contact Bearings · 73 series, medium (B 40°)
The 7311 is an angular contact ball bearing (73 series, medium, B 40°). It has a 55 mm (2.165 in) bore, a 120 mm (4.724 in) outside diameter and is 29 mm (1.142 in) wide. Contact angle: 40° (B). The boundary dimensions are the same for every brand and every suffix.
- dBore diameter
- 55 mm2.165 in2.165 in55 mm
- DOutside diameter
- 120 mm4.724 in4.724 in120 mm
- BWidth
- 29 mm1.142 in1.142 in29 mm
Drawing
7311 specifications
| dBore diameter | 55 mm2.165 in |
|---|---|
| DOutside diameter | 120 mm4.724 in |
| BWidth | 29 mm1.142 in |
| αContact angle | 40° (B) |
Also known as
7311B7311BE7311BEP7311BECBP7311BEGAP7311B-2RZ7311AC7311C7311-B-XL-TVP7311-B-XL-MP7311BDB7311BDF7311BDT7311BW7311A
Other angular contact bearings with a 55 mm bore
Same 55 mm bore in other bearing types
6011Ball Bearings6211Ball Bearings6311Ball Bearings30211Tapered Roller Bearings30311Tapered Roller Bearings31311Tapered Roller BearingsNU211Cylindrical Roller BearingsNU311Cylindrical Roller BearingsNU2211Cylindrical Roller Bearings21311Spherical Roller Bearings22211Spherical Roller Bearings22311Spherical Roller Bearings1211Self-Aligning Ball Bearings1311Self-Aligning Ball Bearings2211Self-Aligning Ball Bearings51111Thrust Ball Bearings51211Thrust Ball Bearings51311Thrust Ball BearingsNA4911Needle Roller BearingsUC211Bearing Units (UCP, UCF, UCFL)
All Angular Contact Bearings sizes
Compare all 103 sizes in the Angular Contact Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
- SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
- Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
- NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.