#21 Drill Size in Inches and mm

Drill Sizes · Number (wire gauge) drills #1–#80

A #21 drill (Number, wire gauge drills #1–#80) measures 0.1590 in (4.039 mm). The closest drills in the other size systems and the threads it is used to tap are listed below.

⌀Diameter
4.039 mm0.1590 in0.1590 in4.039 mm
Nearest fractional drill
5/32″ (.1563″)
Nearest 0.1 mm metric drill
4.0 mm (.1575″)

Drawing

⌀4.039 mm⌀0.1590 in118°shankflutes
⌀4.039 mm⌀0.1590 in
Proportions shown, not to scale · Dimensions in mmDimensions in inches

#21 specifications

⌀Diameter0.1590 in4.039 mm
Nearest fractional drill5/32″ (.1563″)
Nearest 0.1 mm metric drill4.0 mm (.1575″)
Tap drill for#10-32 UNF

The #21 drill (0.159″) is the tap drill for #10-32 UNF; 4 mm (0.1575″) is a close metric substitute.

Drills close to #21 in the other size systems

All Drill Sizes sizes

Compare all 174 sizes in the Drill Sizes chart →

Sources

  1. ASME B94.11M: Twist drills (number, letter, fractional and metric sizes)
  2. Starrett: Decimal equivalents and tap drill sizes chart
  3. Machinery's Handbook, 31st ed.: Twist drill sizes and tap drill tables
  4. ISO 235: Parallel shank jobber and stub series drills (metric diameters)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.