#7 Drill Size in Inches and mm

Drill Sizes · Number (wire gauge) drills #1–#80

A #7 drill (Number, wire gauge drills #1–#80) measures 0.2010 in (5.105 mm). The closest drills in the other size systems and the threads it is used to tap are listed below.

⌀Diameter
5.105 mm0.2010 in0.2010 in5.105 mm
Nearest fractional drill
13/64″ (.2031″)
Nearest 0.1 mm metric drill
5.1 mm (.2008″)

Drawing

⌀5.105 mm⌀0.2010 in118°shankflutes
⌀5.105 mm⌀0.2010 in
Proportions shown, not to scale · Dimensions in mmDimensions in inches

#7 specifications

⌀Diameter0.2010 in5.105 mm
Nearest fractional drill13/64″ (.2031″)
Nearest 0.1 mm metric drill5.1 mm (.2008″)
Tap drill for1/4-20 UNC

The #7 drill is the standard tap drill for 1/4-20 UNC (about 75 % thread). 13/64″ (0.2031″) is the usual fractional substitute; 5.1 mm is the metric one.

Drills close to #7 in the other size systems

All Drill Sizes sizes

Compare all 174 sizes in the Drill Sizes chart →

Sources

  1. ASME B94.11M: Twist drills (number, letter, fractional and metric sizes)
  2. Starrett: Decimal equivalents and tap drill sizes chart
  3. Machinery's Handbook, 31st ed.: Twist drill sizes and tap drill tables
  4. ISO 235: Parallel shank jobber and stub series drills (metric diameters)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.