U.2 (2.5-inch NVMe) Dimensions

Drive Form Factors · Bay drives (3.5", 2.5", 1.8", U.2)

A U.2 (2.5-inch NVMe) is 69.85 mm (2.75 in) wide and 100.45 mm (3.95 in) long. Interface: NVMe (PCIe ×4) via SFF-8639. These are the envelope dimensions set by the form factor, so every drive of this type fits the same bay or slot.

WWidth
69.85 mm2.75 in2.75 in69.85 mm
LLength
100.45 mm3.95 in3.95 in100.45 mm
HHeight (max.)
15 mm0.59 in0.59 in15 mm

Drawing

69.85 mm2.75 in100.45 mm3.95 in
69.85 mm2.75 in15 mm0.59 inEnd view (width × height)
Maximum envelope to scale. Screw holes not shown.Drawn to scale · Dimensions in mmDimensions in inches

U.2 (2.5-inch NVMe) specifications

WWidth69.85 mm2.75 in
LLength100.45 mm3.95 in
HHeight (max.)15 mm0.59 in
Height / thickness options7 or 15 mm
InterfaceNVMe (PCIe ×4) via SFF-8639

A U.2 SSD uses the 2.5-inch case (most often 15 mm, sometimes 7 mm) with an SFF-8639 connector carrying four PCIe lanes. It looks like a SAS connector but needs a U.2-capable backplane or adapter. U.3 drives use the same case and connector with a different pin assignment.

Also known as

SFF-8639U.3

Same width

All Drive Form Factors sizes

Compare all 17 sizes in the Drive Form Factors chart →

Sources

  1. SNIA SFF-8301: Form factor of 3.5" disk drives
  2. SNIA SFF-8201: Form factor of 2.5" disk drives (Rev 3.4)
  3. PCI-SIG: PCI Express M.2 Specification (card sizes, component height classes S1–S3, D1–D5)
  4. Thomas-Krenn wiki: M.2 module sizes and thickness (0.8 mm PCB, S3 = 2.3 mm, D2 = 3.5 mm)
  5. JEDEC MO-300: mSATA outline (50.8 × 29.85 mm; MO-300B half size)
  6. SNIA: EDSFF overview (SFF-TA-1006 E1.S, SFF-TA-1007 E1.L, SFF-TA-1008 E3)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.