Cat3 Cable Specifications

Ethernet Cable Categories

Cat3 twisted-pair cable is specified up to 16 MHz and carries up to 10 Mbit/s over a 100 m (328 ft) channel. ISO/IEC 11801: Class C. Typical construction: 22–24 AWG, U/UTP.

Bandwidth
16 MHz
Max. speed (full channel)
10 Mbit/s
Channel length
100 m328 ft328 ft100 m

Drawing

Cat3 · typical: U/UTPno shield
Cross-section; colors show the four pairs.Schematic, not to scale

Cat3 specifications

Bandwidth16 MHz
Max. speed (full channel)10 Mbit/s
Channel length100 m328 ft
ISO/IEC 11801 classClass C
TIA standardTIA-568 Category 3
Typical conductor22–24 AWG
Typical shieldingU/UTP
ConnectorRJ45 / RJ11
Typical use10BASE-T, telephone

Cat3 is obsolete for data. It survives in telephone wiring and old buildings; it supports only 10 Mbit/s Ethernet.

Neighbouring categories

All Ethernet Cable Categories sizes

Compare all 9 sizes in the Ethernet Cable Categories chart →

Sources

  1. ANSI/TIA-568.2-D: Balanced Twisted-Pair Telecommunications Cabling and Components Standard (Categories 3, 5e, 6, 6A, 8)
  2. ISO/IEC 11801-1:2017, Information technology, generic cabling for customer premises (classes D, E, EA, F, FA, I, II; shield naming Annex)
  3. IEEE 802.3: 10BASE-T, 100BASE-TX, 1000BASE-T, 2.5G/5GBASE-T (802.3bz), 10GBASE-T (802.3an), 25G/40GBASE-T (802.3bq)
  4. TIA TSB-155: Guidelines for the assessment of installed Category 6 cabling to support 10GBASE-T (up to 55 m)
  5. ANSI/TIA-568.0 / 568.1: T568A and T568B pin/pair assignments

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.