Cat8.2 Cable Specifications

Ethernet Cable Categories

Cat8.2 twisted-pair cable is specified up to 2000 MHz and carries up to 40 Gbit/s over a 30 m (98 ft) channel. ISO/IEC 11801: Class II (Cat 8.2). Typical construction: 22–24 AWG, F/FTP, S/FTP.

Bandwidth
2000 MHz
Max. speed (full channel)
40 Gbit/s
Channel length
30 m98 ft98 ft30 m

Drawing

Cat8.2 · typical: S/FTPoverall braid + foil around each pair
Cross-section; colors show the four pairs.Schematic, not to scale

Cat8.2 specifications

Bandwidth2000 MHz
Max. speed (full channel)40 Gbit/s
Channel length30 m98 ft
ISO/IEC 11801 classClass II (Cat 8.2)
TIA standardnot in TIA
Typical conductor22–24 AWG
Typical shieldingF/FTP, S/FTP
ConnectorTERA, GG45
Typical use25GBASE-T, 40GBASE-T

Cat 8.2 (ISO Class II) is the F/FTP or S/FTP version that uses TERA or GG45 connectors instead of RJ45. Same 2000 MHz, 30 m and 40 Gbit/s target, slightly better crosstalk margins.

Neighbouring categories

All Ethernet Cable Categories sizes

Compare all 9 sizes in the Ethernet Cable Categories chart →

Sources

  1. ANSI/TIA-568.2-D: Balanced Twisted-Pair Telecommunications Cabling and Components Standard (Categories 3, 5e, 6, 6A, 8)
  2. ISO/IEC 11801-1:2017, Information technology, generic cabling for customer premises (classes D, E, EA, F, FA, I, II; shield naming Annex)
  3. IEEE 802.3: 10BASE-T, 100BASE-TX, 1000BASE-T, 2.5G/5GBASE-T (802.3bz), 10GBASE-T (802.3an), 25G/40GBASE-T (802.3bq)
  4. TIA TSB-155: Guidelines for the assessment of installed Category 6 cabling to support 10GBASE-T (up to 55 m)
  5. ANSI/TIA-568.0 / 568.1: T568A and T568B pin/pair assignments

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.