HP10×57 Pile Dimensions & Properties
HP Shapes (Bearing Piles) · HP10
HP10×57 is an AISC HP bearing-pile shape. It is 9.99 in (253.7 mm) deep and 10.2 in (259.1 mm) wide, with a 0.565 in (14.4 mm) web and 0.565 in (14.4 mm) flanges, and weighs 57 lb/ft (84.8 kg/m). Area 16.7 in² (10,774 mm²); Ix = 294 in⁴ (12,237.2 cm⁴), Iy = 101 in⁴ (4,203.9 cm⁴).
- dDepth
- 253.7 mm9.99 in9.99 in253.7 mm
- bfFlange width
- 259.1 mm10.2 in10.2 in259.1 mm
- twWeb thickness
- 14.4 mm0.565 in0.565 in14.4 mm
- tfFlange thickness
- 14.4 mm0.565 in0.565 in14.4 mm
Drawing
HP10×57 specifications
| dDepth | 9.99 in253.7 mm |
|---|---|
| bfFlange width | 10.2 in259.1 mm |
| twWeb thickness | 0.565 in14.4 mm |
| tfFlange thickness | 0.565 in14.4 mm |
| kDesign value | 1.25 in31.8 mm |
| kDetailing value | 1 1/4 in31.8 mm |
| k1Detailing value | 15/16 in23.8 mm |
| WWeight | 57 lb/ft84.8 kg/m |
| AArea | 16.7 in²10,774 mm² |
| IxMoment of inertia, strong axis | 294 in⁴12,237.2 cm⁴ |
| ZxPlastic modulus, strong axis | 66.5 in³1089.7 cm³ |
| SxSection modulus, strong axis | 58.8 in³963.6 cm³ |
| rxRadius of gyration, strong axis | 4.18 in106.2 mm |
| IyMoment of inertia, weak axis | 101 in⁴4,203.9 cm⁴ |
| ZyPlastic modulus, weak axis | 30.3 in³496.5 cm³ |
| SySection modulus, weak axis | 19.7 in³322.8 cm³ |
| ryRadius of gyration, weak axis | 2.45 in62.2 mm |
| JTorsional constant | 1.97 in⁴82 cm⁴ |
| bf/2tfFlange slenderness | 9.03 |
| h/twWeb slenderness | 13.9 |
| Metric designation | HP250×85 |
Also known as
HP250×85
All HP Shapes (Bearing Piles) sizes
Compare all 22 shapes in the HP Shapes (Bearing Piles) chart →
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.