HP Pile Size Chart: AISC H-Pile Shapes

Dimensions and section properties of the 22 HP shapes (the H-piles of US practice) from HP8×36 to HP18×204, per the AISC Shapes Database v16.0. An HP shape has a web as thick as its flanges and a flange about as wide as the section is deep.

22 shapesChecked 2026-11-152 sources
HP8×36 to HP18×204: square sections with equal web and flange thickness.Drawn to scale · Dimensions in mmDimensions in inches

Size chartTap a size for its drawing and full specs

22 of 22
ShapedDepthmminbfFlange widthmmintwWeb thicknessmmintfFlange thicknessmminkDesign valuemminAAreamm²in²IxMoment of inertia, strong axiscm⁴in⁴SxSection modulus, strong axiscm³in³rxRadius of gyration, strong axismminIyMoment of inertia, weak axiscm⁴in⁴SySection modulus, weak axiscm³in³ryRadius of gyration, weak axismmin
HP8
HP8×36203.78.02207.38.1611.30.44511.30.44528.71.136,83910.64,953.2119488.329.885.33.361,677.440.3161.99.8849.51.95
HP10
HP10×42246.49.7256.510.110.50.41510.70.4228.71.138,00012.48,740.9210711.243.4104.94.132,984.471.7232.714.261.22.41
HP10×57253.79.99259.110.214.40.56514.40.56531.81.2510,77416.712,237.2294963.658.8106.24.184,203.9101322.819.762.22.45
HP12
HP12×53299.711.8304.81211.00.43511.00.43528.71.1310,00015.516,357.9393109366.7127.85.035,286.1127345.821.172.62.86
HP12×63302.311.9307.312.113.10.51513.10.51531.81.2511,87118.419,646.14721296.279.1128.55.066,368.3153414.625.373.22.88
HP12×74307.312.1309.912.215.40.60515.50.6133.31.3114,06421.823,683.65691537.193.8129.85.117,741.9186498.230.474.22.92
HP12×84312.412.3312.412.317.40.68517.40.68535.11.3815,87124.627,0556501737106130.65.148,865.721356734.674.72.94
HP12×89315.012.4312.412.318.30.7218.30.7233.51.3216,71025.928,844.86931835.4112131.35.179,323.6224596.536.474.72.94
HP14
HP14×73345.413.6370.814.612.80.50512.80.50530.21.1913,80621.430,343.37291753.4107148.35.8410,863.6261586.735.888.63.49
HP14×89350.513.8373.414.715.60.61515.60.61533.31.3116,83926.137,627.39042146.7131149.45.8813,569.1326725.944.389.73.53
HP14×102355.614375.914.817.90.70517.90.70535.11.3819,41930.143,704.31,0502458.1150150.45.9215,816.8380842.351.490.43.56
HP14×117360.714.2378.514.920.40.80520.40.80538.11.522,19434.450,780.21,2202818.6172151.45.9618,439.144397559.591.23.59
HP16
HP16×88388.615.3398.815.713.70.5413.70.5443.71.7216,64525.846,201.71,1102376.1145166.66.5614,526.5349729.244.593.53.68
HP16×101393.715.5401.315.815.90.62515.90.62546.01.8119,29029.954,110.11,3002753168167.46.5917,148.7412855.452.294.23.71
HP16×121401.315.8403.915.919.00.7519.00.7549.01.9323,09735.866,180.81,5903293.8201169.26.6620,978.15041038.963.495.33.75
HP16×141406.416406.41622.20.87522.20.87552.32.0626,90341.777,835.31,8703834.6234170.26.724,932.35991227.474.996.33.79
HP16×162414.016.3408.916.125.4125.4155.42.1830,77447.791,154.72,1904408.1269172.26.7829,011.36971419.186.697.03.82
HP16×183419.116.5414.016.328.71.1328.71.1358.72.3134,90354.1104,474.12,5104981.7304173.06.8134,047.78181638.710098.83.89
HP18
HP18×135444.517.5452.117.819.00.7519.00.7549.01.9325,74239.991,570.92,2004113.2251188.77.4329,385.97061299.579.3106.94.21
HP18×157449.617.7454.717.922.10.8722.10.8752.12.0529,80646.2106,971.52,5704752.2290189.57.4634,672.18331525.693.1107.94.25
HP18×181457.218457.21825.4125.4155.42.1834,32353.2125,701.93,0205506.1336191.37.5340,540.99741769.8108108.74.28
HP18×204464.818.3459.718.128.71.1328.71.1358.72.3138,83960.2144,848.53,4806227.1380193.07.646,617.91,1202032124109.54.31

How to read an HP designation

HP12×53 is a bearing-pile shape of 12 in nominal depth weighing 53 lb/ft. It is 11.8 in deep and 12.0 in wide, with a 0.435 in web and 0.435 in flanges. In metric the same shape is HP310×79.

HP shapes are rolled so that tw ≈ tf (within 0.005 in on a few sizes) and bf ≈ d. Equal thicknesses keep the section from being damaged at the thin parts during driving and give the same corrosion allowance on web and flanges. Within one nominal size, heavier piles add thickness on the outside, so depth and width grow a little with weight.

The property columns are the same as for W shapes. For a pile, A gives the structural capacity in compression and the driving stress, Iy and ry the buckling resistance about the weak axis where the soil does not brace the pile, and Sx / Zx the bending capacity under lateral load.

About HP Shapes (Bearing Piles)

H-piles are driven into the ground to carry foundation loads to rock or dense soil, either in end bearing or by friction along their length. Because the cross-section is small, they displace little soil, which lets them be driven through dense layers and boulders and spliced to great lengths. They are also used as soldier piles in retaining walls and as columns.

The chart lists every HP shape in the AISC Shapes Database v16.0, HP8 to HP18. Pile material is usually ASTM A572 Grade 50 or A690 (better corrosion resistance in splash zones); ASTM A6 sets the rolling tolerances. Piles are commonly ordered in 40 to 60 ft lengths and field-spliced by welding.

Corrosion matters for design life: where the ground is disturbed or aggressive, designers deduct a corrosion allowance from the thickness of web and flanges. Use the area and properties of the reduced section in that case; the values here are for the full, uncorroded section.

HP shape or W shape?

A W14×73 and an HP14×73 weigh the same, but the HP14×73 is 14.6 in wide with 0.505 in web and flanges, while the W14×74 has a 10.1 in flange, a 0.450 in web and 0.785 in flanges. The HP shape has more web, a larger Iy and survives hard driving; the W shape is the better beam. European bearing piles (HP 200 to HP 400, EN 10365) are listed with the European HE sections.

Questions

What are the dimensions of an HP12×53?

HP12×53: 11.8 in deep, 12.0 in wide, web and flanges 0.435 in, 53 lb/ft, area 15.5 in², Ix = 393 in⁴.

What are the dimensions of an HP14×73?

HP14×73: 13.6 in deep, 14.6 in wide, web and flanges 0.505 in, 73 lb/ft, area 21.4 in², Ix = 729 in⁴.

Why do H-piles have equal web and flange thickness?

So that no part of the section is much thinner than the rest: it resists damage while being driven and loses section evenly to corrosion.

What is the largest HP shape?

HP18×204: 18.3 in deep, 18.1 in wide, 1.13 in web and flanges, 204 lb/ft.

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.