HP12×89 Pile Dimensions & Properties
HP Shapes (Bearing Piles) · HP12
HP12×89 is an AISC HP bearing-pile shape. It is 12.4 in (315.0 mm) deep and 12.3 in (312.4 mm) wide, with a 0.72 in (18.3 mm) web and 0.72 in (18.3 mm) flanges, and weighs 89 lb/ft (132.4 kg/m). Area 25.9 in² (16,710 mm²); Ix = 693 in⁴ (28,844.8 cm⁴), Iy = 224 in⁴ (9,323.6 cm⁴).
- dDepth
- 315.0 mm12.4 in12.4 in315.0 mm
- bfFlange width
- 312.4 mm12.3 in12.3 in312.4 mm
- twWeb thickness
- 18.3 mm0.72 in0.72 in18.3 mm
- tfFlange thickness
- 18.3 mm0.72 in0.72 in18.3 mm
Drawing
HP12×89 specifications
| dDepth | 12.4 in315.0 mm |
|---|---|
| bfFlange width | 12.3 in312.4 mm |
| twWeb thickness | 0.72 in18.3 mm |
| tfFlange thickness | 0.72 in18.3 mm |
| kDesign value | 1.32 in33.5 mm |
| kDetailing value | 1 5/8 in41.3 mm |
| k1Detailing value | 1 3/16 in30.2 mm |
| WWeight | 89 lb/ft132.4 kg/m |
| AArea | 25.9 in²16,710 mm² |
| IxMoment of inertia, strong axis | 693 in⁴28,844.8 cm⁴ |
| ZxPlastic modulus, strong axis | 127 in³2081.2 cm³ |
| SxSection modulus, strong axis | 112 in³1835.4 cm³ |
| rxRadius of gyration, strong axis | 5.17 in131.3 mm |
| IyMoment of inertia, weak axis | 224 in⁴9,323.6 cm⁴ |
| ZyPlastic modulus, weak axis | 56 in³917.7 cm³ |
| SySection modulus, weak axis | 36.4 in³596.5 cm³ |
| ryRadius of gyration, weak axis | 2.94 in74.7 mm |
| JTorsional constant | 4.92 in⁴204.79 cm⁴ |
| bf/2tfFlange slenderness | 8.54 |
| h/twWeb slenderness | 13.6 |
| Metric designation | HP310×132 |
Also known as
HP310×132
HP shapes of about the same weight in other sizes
All HP Shapes (Bearing Piles) sizes
Compare all 22 shapes in the HP Shapes (Bearing Piles) chart →
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.