HP18×135 Pile Dimensions & Properties
HP Shapes (Bearing Piles) · HP18
HP18×135 is an AISC HP bearing-pile shape. It is 17.5 in (444.5 mm) deep and 17.8 in (452.1 mm) wide, with a 0.75 in (19.0 mm) web and 0.75 in (19.0 mm) flanges, and weighs 135 lb/ft (200.9 kg/m). Area 39.9 in² (25,742 mm²); Ix = 2,200 in⁴ (91,570.9 cm⁴), Iy = 706 in⁴ (29,385.9 cm⁴).
- dDepth
- 444.5 mm17.5 in17.5 in444.5 mm
- bfFlange width
- 452.1 mm17.8 in17.8 in452.1 mm
- twWeb thickness
- 19.0 mm0.75 in0.75 in19.0 mm
- tfFlange thickness
- 19.0 mm0.75 in0.75 in19.0 mm
Drawing
HP18×135 specifications
| dDepth | 17.5 in444.5 mm |
|---|---|
| bfFlange width | 17.8 in452.1 mm |
| twWeb thickness | 0.75 in19.0 mm |
| tfFlange thickness | 0.75 in19.0 mm |
| kDesign value | 1.93 in49.0 mm |
| kDetailing value | 1 15/16 in49.2 mm |
| k1Detailing value | 1 9/16 in39.7 mm |
| WWeight | 135 lb/ft200.9 kg/m |
| AArea | 39.9 in²25,742 mm² |
| IxMoment of inertia, strong axis | 2,200 in⁴91,570.9 cm⁴ |
| ZxPlastic modulus, strong axis | 281 in³4604.8 cm³ |
| SxSection modulus, strong axis | 251 in³4113.2 cm³ |
| rxRadius of gyration, strong axis | 7.43 in188.7 mm |
| IyMoment of inertia, weak axis | 706 in⁴29,385.9 cm⁴ |
| ZyPlastic modulus, weak axis | 122 in³1999.2 cm³ |
| SySection modulus, weak axis | 79.3 in³1299.5 cm³ |
| ryRadius of gyration, weak axis | 4.21 in106.9 mm |
| JTorsional constant | 9.12 in⁴379.6 cm⁴ |
| bf/2tfFlange slenderness | 11.9 |
| h/twWeb slenderness | 18.2 |
| Metric designation | HP460×202 |
Also known as
HP460×202
All HP Shapes (Bearing Piles) sizes
Compare all 22 shapes in the HP Shapes (Bearing Piles) chart →
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.