1/4" Hex Bolt Head Size

Inch Hex Bolts

A 1/4" hex cap screw (ASME B18.2.1) takes a 7/16 in (11.1 mm) wrench. The head is 5/32 in (3.97 mm) high (basic) and up to 0.505 in (12.83 mm) across the corners. Threads: 20 TPI (1.270 mm) coarse (UNC) or 28 TPI (0.907 mm) fine (UNF).

FWidth across flats
11.1 mm7/16 in7/16 in11.1 mm
HHead height, cap screw (basic)
3.97 mm5/32 in5/32 in3.97 mm
GWidth across corners
12.83 mm0.505 in0.505 in12.83 mm
nCoarse thread (UNC)
1.270 mm20 TPI20 TPI1.270 mm

Drawing

G 12.83 mmG 0.505 in3.97 mm5/32 in1/4"
F 11.1 mmF 7/16 in
Hex cap screw, across-corners side viewDrawn to scale · Dimensions in mmDimensions in inches

1/4" specifications

dMajor diameter1/4 in6.35 mm
FWidth across flats7/16 in11.1 mm
GWidth across corners0.505 in12.83 mm
HHead height, cap screw (basic)5/32 in3.97 mm
Head height, hex bolt (basic)11/64 in4.37 mm
nCoarse thread (UNC)20 TPI1.270 mm
nFine thread (UNF)28 TPI0.907 mm

Also known as

1/4-201/4-28

Wrench and socket for the 1/4"

1/4" in other charts

All Inch Hex Bolts sizes

Compare all 14 sizes in the Inch Hex Bolts chart →

Sources

  1. ASME B18.2.1-2012: Square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange, lobed head and lag screws (inch series)
  2. ASME B1.1: Unified inch screw threads (UN, UNR thread form)
  3. Brighton-Best: Hex head bolts / cap screws dimensional data
  4. AmesWeb: Hex cap screw dimensions (ASME B18.2.1)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.