3/8" Hex Bolt Head Size

Inch Hex Bolts

A 3/8" hex cap screw (ASME B18.2.1) takes a 9/16 in (14.3 mm) wrench. The head is 15/64 in (5.95 mm) high (basic) and up to 0.650 in (16.51 mm) across the corners. Threads: 16 TPI (1.588 mm) coarse (UNC) or 24 TPI (1.058 mm) fine (UNF).

FWidth across flats
14.3 mm9/16 in9/16 in14.3 mm
HHead height, cap screw (basic)
5.95 mm15/64 in15/64 in5.95 mm
GWidth across corners
16.51 mm0.650 in0.650 in16.51 mm
nCoarse thread (UNC)
1.588 mm16 TPI16 TPI1.588 mm

Drawing

G 16.51 mmG 0.650 in5.95 mm15/64 in3/8"
F 14.3 mmF 9/16 in
Hex cap screw, across-corners side viewDrawn to scale · Dimensions in mmDimensions in inches

3/8" specifications

dMajor diameter3/8 in9.52 mm
FWidth across flats9/16 in14.3 mm
GWidth across corners0.650 in16.51 mm
HHead height, cap screw (basic)15/64 in5.95 mm
Head height, hex bolt (basic)1/4 in6.35 mm
nCoarse thread (UNC)16 TPI1.588 mm
nFine thread (UNF)24 TPI1.058 mm

Also known as

3/8-163/8-24

Wrench and socket for the 3/8"

3/8" in other charts

All Inch Hex Bolts sizes

Compare all 14 sizes in the Inch Hex Bolts chart →

Sources

  1. ASME B18.2.1-2012: Square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange, lobed head and lag screws (inch series)
  2. ASME B1.1: Unified inch screw threads (UN, UNR thread form)
  3. Brighton-Best: Hex head bolts / cap screws dimensional data
  4. AmesWeb: Hex cap screw dimensions (ASME B18.2.1)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.