1/2" USS Washer Dimensions

SAE & USS Washers · USS: wide series (W)

A 1/2" USS flat washer (USS: wide series, W) has a 0.562 in (14.3 mm) inside diameter, a 1.375 in (34.9 mm) outside diameter and is 0.109 in (2.77 mm) thick (nominal, ASME B18.22.1 Type A).

IDInside diameter
14.3 mm0.562 in0.562 in14.3 mm
ODOutside diameter
34.9 mm1.375 in1.375 in34.9 mm
tThickness (nominal)
2.77 mm0.109 in0.109 in2.77 mm

Drawing

⌀34.9 mm⌀1.375 in⌀14.3 mm⌀0.562 in
t 2.77 mmt 0.109 in
Drawn to scale · Dimensions in mmDimensions in inches

1/2" USS specifications

IDInside diameter0.562 in14.3 mm
ODOutside diameter1.375 in34.9 mm
tThickness (nominal)0.109 in2.77 mm

1/2 in USS: 9/16 in hole, 1-3/8 in OD, 0.109 in thick.

The same bolt size in the other series

All SAE & USS Washers sizes

Compare all 28 sizes in the SAE & USS Washers chart →

Sources

  1. ASME B18.22.1: Plain washers (Type A narrow and wide series)
  2. Bolt Depot: USS and SAE flat washer size charts
  3. AmesWeb: Type A plain washers dimensions chart
  4. GlobalSpec: Washers information (N = SAE, W = USS)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.