LM20UU Linear Bearing Dimensions

Linear Bearings · LM…UU standard (Asian / JIS)

The LM20UU is a linear ball bushing (LM…UU standard, Asian / JIS) for a 20 mm (0.787 in) shaft: 32 mm (1.260 in) outside diameter, 42 mm (1.654 in) long.

drShaft diameter
20 mm0.787 in0.787 in20 mm
DOutside diameter
32 mm1.260 in1.260 in32 mm
LLength
42 mm1.654 in1.654 in42 mm

Drawing

42 mm1.654 in⌀32 mm⌀1.260 in⌀20 mm⌀0.787 in30.5 mm1.201 in
Section: sleeve with two retaining-ring grooves, ball rows running on the shaft (dashed).Drawn to scale · Dimensions in mmDimensions in inches

LM20UU specifications

drShaft diameter20 mm0.787 in
DOutside diameter32 mm1.260 in
LLength42 mm1.654 in
BGroove spacing (outer faces)30.5 mm1.201 in
WGroove width1.6 mm0.063 in
D1Groove diameter30.5 mm1.201 in

Also known as

LM20LM20UU-AJLM20UU-OP

Other bushings for the same 20 mm shaft

All Linear Bearings sizes

Compare all 31 sizes in the Linear Bearings chart →

Sources

  1. JIS B 1514 (Asian LM series) / ISO 10285: Linear motion rolling bearings, sleeve type, boundary dimensions
  2. THK: Linear bushing model LM, dimensional table
  3. Samick: Linear bushing LM, LM-L and LME catalogue pages

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.