LME25UU Linear Bearing Dimensions

Linear Bearings · LME…UU European (ISO series 3)

The LME25UU is a linear ball bushing (LME…UU European, ISO series 3) for a 25 mm (0.984 in) shaft: 40 mm (1.575 in) outside diameter, 58 mm (2.283 in) long.

drShaft diameter
25 mm0.984 in0.984 in25 mm
DOutside diameter
40 mm1.575 in1.575 in40 mm
LLength
58 mm2.283 in2.283 in58 mm

Drawing

58 mm2.283 in⌀40 mm⌀1.575 in⌀25 mm⌀0.984 in
Section: sleeve with two retaining-ring grooves, ball rows running on the shaft (dashed).Drawn to scale · Dimensions in mmDimensions in inches

LME25UU specifications

drShaft diameter25 mm0.984 in
DOutside diameter40 mm1.575 in
LLength58 mm2.283 in

Also known as

LME25LME25UU-AJLME25UU-OP

Other bushings for the same 25 mm shaft

All Linear Bearings sizes

Compare all 31 sizes in the Linear Bearings chart →

Sources

  1. JIS B 1514 (Asian LM series) / ISO 10285: Linear motion rolling bearings, sleeve type, boundary dimensions
  2. THK: Linear bushing model LM, dimensional table
  3. Samick: Linear bushing LM, LM-L and LME catalogue pages

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.