2×4 Actual Size

Lumber Sizes · Dimension lumber (nominal 2 to 4 in thick)

A 2×4 (Dimension lumber, nominal 2 to 4 in thick) actually measures 1 1/2 in (38.1 mm) by 3 1/2 in (88.9 mm).

tActual thickness (dry)
38.1 mm1 1/2 in1 1/2 in38.1 mm
wActual width (dry)
88.9 mm3 1/2 in3 1/2 in88.9 mm
Actual cross-section
3,387 mm²5.25 in²5.25 in²3,387 mm²

Drawing

88.9 mm3 1/2 in38.1 mm1 1/2 innominal 2×4
End grain, actual dry size; dashed outline: nominal size.Drawn to scale · Dimensions in mmDimensions in inches

2×4 specifications

tActual thickness (dry)1 1/2 in38.1 mm
wActual width (dry)3 1/2 in88.9 mm
tThickness, green1 9/16 in39.7 mm
wWidth, green3 9/16 in90.5 mm
Actual cross-section5.25 in²3,387 mm²
Board feet per linear foot0.667

A 2×4 is 1-1/2 × 3-1/2 in (38 × 89 mm). One board foot is 12 × 12 × 1 in nominal, so a 2×4 has 2/3 board foot per linear foot (5.33 bd ft in an 8-ft stud). Precut studs are 92-5/8 in long.

Other lumber with the same 3 1/2 in width

All Lumber Sizes sizes

Compare all 35 sizes in the Lumber Sizes chart →

Sources

  1. NIST Voluntary Product Standard PS 20 (PS 20-20 / PS 20-25): American Softwood Lumber Standard, Table 3 minimum dressed sizes
  2. APA: The Engineered Wood Association: performance-category panel thickness (PS 1 / PS 2)
  3. Western Wood Products Association: Western Lumber Grading Rules, standard sizes
  4. BS EN 336:2013, Structural timber, sizes, permitted deviations; TRADA guidance on CLS and regularised sizes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.