Lumber Size Chart: Nominal vs Actual Dimensions

Actual dressed sizes of North American softwood lumber, structural panels and common UK/European sections. Lumber is named by its rough-sawn nominal size, so a 2×4 is actually 1-1/2 × 3-1/2 in (38 × 89 mm) once dried and planed.

35 sizesChecked 2026-11-154 sources
2×42×62×82×102×124×46×6Pieces stand on edge; same scale for all.
Filled: actual dry size. Dashed: the nominal size the piece is named after.Drawn to scale · Dimensions in mmDimensions in inches

Size chartTap a size for its drawing and full specs

35 of 35
NominaltActual thickness (dry)mminmm · inwActual width (dry)mminmm · intThickness, greenmminmm · inwWidth, greenmminmm · inActual cross-sectionmm²in²mm² · in²Board feet per linear foot
Dimension lumber (nominal 2 to 4 in thick)
2×238.11 1/238.11 1/239.71 9/1639.71 9/161,4522.250.333
2×338.11 1/263.52 1/239.71 9/1665.12 9/162,4193.750.5
2×438.11 1/288.93 1/239.71 9/1690.53 9/163,3875.250.667
2×638.11 1/2139.75 1/239.71 9/16142.95 5/85,3238.251
2×838.11 1/2184.17 1/439.71 9/16190.57 1/27,01610.881.333
2×1038.11 1/22359 1/439.71 9/16241.39 1/28,95213.881.667
2×1238.11 1/2285.811 1/439.71 9/16292.111 1/210,88716.882
4×488.93 1/288.93 1/290.53 9/1690.53 9/167,90312.251.333
4×688.93 1/2139.75 1/290.53 9/16142.95 5/812,41919.252
Boards (nominal 1 and 5/4 in thick)
1×2193/438.11 1/219.825/3239.71 9/167261.130.167
1×3193/463.52 1/219.825/3265.12 9/161,2101.880.25
1×4193/488.93 1/219.825/3290.53 9/161,6942.630.333
1×6193/4139.75 1/219.825/32142.95 5/82,6614.130.5
1×8193/4184.17 1/419.825/32190.57 1/23,5085.440.667
1×10193/42359 1/419.825/32241.39 1/24,4766.940.833
1×12193/4285.811 1/419.825/32292.111 1/25,4448.441
5/4×625.41139.75 1/226.21 1/32142.95 5/83,5485.500.625
Timbers (nominal 5 in and thicker, green sizes)
6×6139.75 1/2139.75 1/2139.75 1/2139.75 1/219,51630.253
8×8190.57 1/2190.57 1/2190.57 1/2190.57 1/236,29056.255.333
Structural panels (plywood and OSB, 4 × 8 ft)
3/8" plywood8.711/321219.248————
1/2" plywood11.915/321219.248————
5/8" plywood15.119/321219.248————
3/4" plywood18.323/321219.248————
7/16" OSB11.17/161219.248————
3/4" OSB18.323/321219.248————
UK / European sawn softwood (mm)
CLS 38×63381.496632.480——2,3943.71—
CLS 38×89381.496893.504——3,3825.24—
CLS 38×140381.4961405.512——5,3208.25—
47×75471.850752.953——3,5255.46—
47×100471.8501003.937——4,7007.29—
47×125471.8501254.921——5,8759.11—
47×150471.8501505.906——7,05010.93—
47×175471.8501756.890——8,22512.75—
47×200471.8502007.874——9,40014.57—
47×225471.8502258.858——10,57516.39—

Nominal vs actual: how lumber sizes work

A 2×4 is named for the rough-sawn size (about 2 × 4 in) before it is dried and surfaced on four sides (S4S). The American Softwood Lumber Standard PS 20 fixes the minimum finished sizes: dimension lumber 2 in nominal is 1-1/2 in thick dry; widths of 2 to 7 in lose 1/2 in, widths of 8 in and more lose 3/4 in. So 2×6 = 1-1/2 × 5-1/2 in, 2×10 = 1-1/2 × 9-1/4 in.

Boards (1 in nominal) are 3/4 in thick; 5/4 (five-quarter) decking is 1 in thick. Green lumber (over 19 % moisture) is surfaced slightly larger (1-9/16 in instead of 1-1/2 in) because it shrinks as it dries. Timbers (5 in and thicker, e.g. 6×6) are usually sold green and are 1/2 in under nominal: 6×6 = 5-1/2 × 5-1/2 in.

Board feet use the nominal size: one board foot is 12 × 12 × 1 in nominal. A 2×4 has 0.667 board feet per linear foot, so a 2×4×8 contains 5.33 board feet.

Plywood and OSB are labelled by performance category, which is the old nominal thickness. Sheathing marked "1/2" is 15/32 in, "3/4" is 23/32 in. Sheets are 48 × 96 in (4 × 8 ft); in metric markets the standard sheet is 1220 × 2440 mm.

About Lumber Sizes

Lengths are sold in 2-ft steps (8, 10, 12, 14, 16 ft and longer) and are cut to at least the stated length. Wall studs also come precut: 92-5/8 in for an 8-ft wall (with a bottom plate and two top plates the frame is 97-1/8 in, leaving room for a 96-in drywall sheet and ceiling) and 104-5/8 in for 9-ft walls.

Actual sizes in the chart are the PS 20 minimum dressed sizes, which mills work to. Dry lumber can still swell or shrink about 1 % across the grain with the seasons; green lumber shrinks about 3–4 % as it dries. Measure before you cut critical joints.

When converting a plan from nominal to actual, the classic mistake is wall thickness: a 2×4 wall with 1/2-in drywall on both sides is 4-1/2 in thick, not 5 in. Three 2×4s nailed face to face make a 4-1/2-in post, 1 in thicker than a 4×4.

Metric countries name timber by its actual size. UK construction timber is 47 mm thick (47×100, 47×150 … regularised to a consistent width) and CLS studs are 38 × 89 mm: exactly the size of a North American 2×4, with rounded edges. A 2×4 converted is 38.1 × 88.9 mm.

Hardwood lumber is different

Hardwood is sold in quarter-inch thicknesses of the rough board (4/4, 5/4, 8/4 …) in random widths and lengths. Surfaced 4/4 hardwood is usually 13/16 in (S2S); exact sizes depend on the mill. The chart covers softwood construction lumber only.

Pressure-treated and cedar

Treated lumber is surfaced to the same dry or green sizes, but is often sold wet from treatment and measures slightly fuller until it dries. Western red cedar decking and boards can be sold rough or in mill-specific patterns, so check the actual size on the tag.

Questions

What is the actual size of a 2x4?

1-1/2 × 3-1/2 in (38 × 89 mm) when dry. Green (unseasoned) 2×4s are surfaced to 1-9/16 × 3-9/16 in. The 2 × 4 in name is the rough-sawn size before drying and planing.

Why is a 2x4 not 2 inches by 4 inches?

The log is sawn to roughly 2 × 4 in, then dried (it shrinks) and planed smooth on four sides. PS 20 standardised the finished dry size at 1-1/2 × 3-1/2 in.

What is the actual size of a 4x4 and a 6x6?

A 4×4 is 3-1/2 × 3-1/2 in (89 mm). A 6×6 is a timber, dressed green to 5-1/2 × 5-1/2 in (140 mm); it will shrink a little as it dries.

How thick is 3/4 plywood really?

23/32 in (0.719 in, 18.3 mm) for sheathing and subfloor panels labelled 3/4 performance category. Likewise 1/2 is 15/32 in, 5/8 is 19/32 in and 3/8 is 11/32 in.

What is the actual width of a 2x10 and a 2x12?

2×10: 1-1/2 × 9-1/4 in. 2×12: 1-1/2 × 11-1/4 in. From 8 in nominal width up, 3/4 in is lost to drying and planing.

What is the UK equivalent of a 2x4?

CLS 38 × 89 mm is the same size. Regularised UK carcassing timber is 47 mm thick (47 × 100 mm is the closest common section).

Sources

  1. NIST Voluntary Product Standard PS 20 (PS 20-20 / PS 20-25): American Softwood Lumber Standard, Table 3 minimum dressed sizes
  2. APA: The Engineered Wood Association: performance-category panel thickness (PS 1 / PS 2)
  3. Western Wood Products Association: Western Lumber Grading Rules, standard sizes
  4. BS EN 336:2013, Structural timber, sizes, permitted deviations; TRADA guidance on CLS and regularised sizes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.