DDR5 DIMM: Pins, Size and Voltage

Memory Modules (RAM) · DIMM: desktops, workstations, servers

A DDR5 DIMM has 288 contacts at a 0.85 mm pitch on a module 133.35 mm (5.25 in) long. It runs at 1.1 V and covers JEDEC data rates of 4800–8800 MT/s. The key notch is unique to DDR5 modules of this form factor, so it fits only DDR5 slots of the same type.

Pins (contacts)
288
LLength
133.35 mm5.25 in5.25 in133.35 mm
Supply voltage
1.1 V
JEDEC data rates
4800–8800 MT/s

Drawing

288 contacts · 0.85 mm pitch133.35 mm5.25 in31.25 mm1.23 in
Outline and contact edge to scale; memory chips indicative. Key notch not shown.Drawn to scale · Dimensions in mmDimensions in inches

DDR5 DIMM specifications

GenerationDDR5
Pins (contacts)288
LLength133.35 mm5.25 in
HHeight (standard)31.25 mm1.23 in
Contact pitch0.85 mm0.033 in
Supply voltage1.1 V
JEDEC data rates4800–8800 MT/s
Key notches1

Same 288-pin count and 133.35 mm length as DDR4, but the notch is in a different place, so DDR5 and DDR4 cannot be swapped. Each module has its own power management chip (PMIC). JEDEC data rates run from 4800 to 8800 MT/s.

Same generation, other form factor

Same pin count, different generation (not interchangeable)

All Memory Modules (RAM) sizes

Compare all 11 sizes in the Memory Modules (RAM) chart →

Sources

  1. JEDEC JESD79-4 (DDR4) and JESD79-5C (DDR5, data rates to 8800 MT/s, April 2024)
  2. JEDEC module outlines MO-309 (288-pin DDR4 DIMM), MO-329 (288-pin DDR5 DIMM), MO-310 / MO-337 (DDR4 / DDR5 SO-DIMM)
  3. Kingston: DDR4 and DDR5 overviews (pin count, voltage, notch position differs)
  4. Amphenol / TE Connectivity: 288-position 0.85 mm pitch DDR4/DDR5 DIMM sockets; DDR3 240-position sockets

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.