RAM Module Sizes: DIMM and SO-DIMM Pins, Dimensions, Voltage
Desktop memory comes on DIMMs 133.35 mm (5.25 in) long, laptop memory on SO-DIMMs about 68–70 mm long. Every generation (DDR2, DDR3, DDR4, DDR5) has its key notch in a different place, so a module only fits a slot of its own generation and type, even when the pin count is the same (DDR4 and DDR5 DIMMs both have 288 pins).
Size chartTap a size for its drawing and full specs
| Module | Pins (contacts) | LLengthmmin | HHeight (standard)mmin | Contact pitchmmin | Supply voltageV | JEDEC data ratesMT/s |
|---|---|---|---|---|---|---|
| DIMM: desktops, workstations, servers | ||||||
| DDR5 DIMM | 288 | 133.355.25 | 31.251.23 | 0.850.033 | 1.1 | 4800–8800 |
| DDR4 DIMM | 288 | 133.355.25 | 31.251.23 | 0.850.033 | 1.2 | 1600–3200 |
| DDR3 DIMM | 240 | 133.355.25 | — | 10.039 | 1.5 | 800–2133 |
| DDR2 DIMM | 240 | 133.355.25 | — | 10.039 | 1.8 | 400–1066 |
| DDR DIMM | 184 | 133.355.25 | — | 1.270.050 | 2.5 | 200–400 |
| SDR SDRAM DIMM | 168 | 133.355.25 | — | 1.270.050 | 3.3 | 66–133 |
| SO-DIMM: laptops, mini PCs, NAS | ||||||
| DDR5 SO-DIMM | 262 | 69.62.74 | 301.18 | 0.50.020 | 1.1 | 4800–8800 |
| DDR4 SO-DIMM | 260 | 69.62.74 | 301.18 | 0.50.020 | 1.2 | 1600–3200 |
| DDR3 SO-DIMM | 204 | 67.62.66 | — | 0.60.024 | 1.5 | 800–2133 |
| DDR2 SO-DIMM | 200 | 67.62.66 | — | 0.60.024 | 1.8 | 400–1066 |
| DDR SO-DIMM | 200 | 67.62.66 | — | 0.60.024 | 2.5 | 200–400 |
No exact match. The nearest sizes:
How to identify a memory module
Read the label first. A module marked DDR4-3200 or PC4-25600 is DDR4 running at 3200 MT/s; the PC number is the peak bandwidth in MB/s (3200 × 8 bytes = 25,600). The prefix tells the generation: PC (DDR, e.g. PC3200 = DDR-400), PC2 (DDR2), PC3 (DDR3; PC3L = 1.35 V DDR3L), PC4 (DDR4), PC5 (DDR5, e.g. PC5-38400 = DDR5-4800). A trailing letter often gives the type: U unbuffered, R registered, E ECC, S SO-DIMM.
Without a label, count the contacts on one side and measure the length. 133 mm long is a DIMM; 67–70 mm is an SO-DIMM. Then look at the notch: it is never in the middle, and its offset from the centre is different for each generation. Lay the module next to a known one of the same length. If the notches do not line up, it is a different generation.
Speeds are in MT/s (mega-transfers per second). DDR memory transfers twice per clock, so DDR4-3200 runs a 1600 MHz clock; many tools and shops write "3200 MHz", which means the same module.
About Memory Modules (RAM)
All full-size DIMMs since SDRAM share the same 133.35 mm length, so the length alone tells you nothing about the generation. What changes is the number and spacing of the contacts (168 at 1.27 mm for SDRAM, 240 at 1.0 mm for DDR2 and DDR3, 288 at 0.85 mm for DDR4 and DDR5), the supply voltage and the key notch. The notch is the reliable safeguard: a DDR4 module will not go into a DDR5 slot or the other way round.
SO-DIMMs are the half-length laptop version: 200 pins for DDR and DDR2, 204 for DDR3, 260 for DDR4 and 262 for DDR5. DDR4 and DDR5 SO-DIMMs are 69.6 mm long, 2 mm longer than the 67.6 mm of earlier ones, and 30 mm high. Many thin laptops have no slots at all and use memory soldered to the board (LPDDR), which cannot be upgraded.
Within a generation, unbuffered (UDIMM), registered (RDIMM) and load-reduced (LRDIMM) modules have the same outline but are not generally interchangeable: desktop boards take unbuffered memory, servers mostly take registered memory. ECC unbuffered modules work only on boards and CPUs that support ECC. Check the motherboard manual or the maker's qualified memory list before buying.
Voltage and DDR3L
Supply voltage fell with every generation: 3.3 V for SDRAM, 2.5 V for DDR, 1.8 V for DDR2, 1.5 V for DDR3, 1.2 V for DDR4 and 1.1 V for DDR5. DDR3L is a 1.35 V version of DDR3 with the same notch. DDR3L modules are usually rated to run at 1.5 V too, so they work in most DDR3 machines, but standard 1.5 V DDR3 in a laptop that supplies only 1.35 V may fail to boot.
What changed with DDR5
DDR5 modules carry their own power management chip (PMIC) and split each module into two independent 32-bit sub-channels. The JEDEC data rates started at 4800 MT/s and were extended to 8800 MT/s in the JESD79-5C update of April 2024. Overclocking profiles (Intel XMP, AMD EXPO) run modules beyond the JEDEC rates; those speeds depend on the CPU and board.
CAMM2
CAMM2 is a newer JEDEC laptop memory module that lies flat and is screwed onto a compression connector instead of plugging into an edge slot. It is not a DIMM or SO-DIMM and is not interchangeable with them; it is not listed in this chart.
Questions
Can I put DDR4 RAM in a DDR5 slot?
No. Both have 288 pins and are 133.35 mm long, but the key notch is in a different place and the voltages differ (1.2 V vs 1.1 V). The module physically will not seat in the wrong slot.
What is the difference between DIMM and SO-DIMM?
Size and pin count. A DIMM is 133.35 mm long and used in desktops and servers; an SO-DIMM is 67.6–69.6 mm long and used in laptops and mini PCs. DDR4 DIMMs have 288 pins, DDR4 SO-DIMMs 260; DDR5 has 288 and 262.
How long is a RAM stick?
Desktop DIMMs are 133.35 mm (5.25 in) long for every generation. Laptop SO-DIMMs are 67.6 mm (2.66 in) for DDR, DDR2 and DDR3 and 69.6 mm (2.74 in) for DDR4 and DDR5. Heat spreaders on gaming modules add height, not length.
Do DDR3 and DDR3L work together?
They have the same notch and fit the same slots. DDR3L (1.35 V) modules are usually also rated for 1.5 V and work in most DDR3 systems; standard DDR3 (1.5 V) may not work in a laptop that supplies only 1.35 V.
What does PC4-25600 mean?
It is the module bandwidth: 25,600 MB/s, which is DDR4-3200 (3200 MT/s × 8 bytes). Likewise PC4-21300 = DDR4-2666, PC3-12800 = DDR3-1600 and PC5-38400 = DDR5-4800.
Sources
- JEDEC JESD79-4 (DDR4) and JESD79-5C (DDR5, data rates to 8800 MT/s, April 2024)
- JEDEC module outlines MO-309 (288-pin DDR4 DIMM), MO-329 (288-pin DDR5 DIMM), MO-310 / MO-337 (DDR4 / DDR5 SO-DIMM)
- Kingston: DDR4 and DDR5 overviews (pin count, voltage, notch position differs)
- Amphenol / TE Connectivity: 288-position 0.85 mm pitch DDR4/DDR5 DIMM sockets; DDR3 240-position sockets
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.