M1 Thread Size: Pitch, Tap Drill and Clearance Hole
Metric Threads
M1 is a metric thread with a major diameter of 1 mm (0.039 in) and a coarse pitch of 0.25 mm (101.6 TPI). Drill 0.75 mm (0.030 in) before tapping the coarse thread; the common fine thread is M1 × 0.2 mm, tapped with a 0.8 mm drill. For a bolt to pass through, drill a 1.2 mm (0.047 in) clearance hole (ISO 273 medium).
- PCoarse pitch
- 0.25 mm101.6 TPI101.6 TPI0.25 mm
- Tap drill, coarse
- 0.75 mm0.030 in0.030 in0.75 mm
- Clearance hole, medium
- 1.2 mm0.047 in0.047 in1.2 mm
- d₃Minor diameter, bolt
- 0.693 mm0.0273 in0.0273 in0.693 mm
Drawing
M1 specifications
| dMajor diameter | 1 mm0.039 in |
|---|---|
| PCoarse pitch | 0.25 mm101.6 TPI |
| Fine pitch (common) | 0.2 mm127.0 TPI |
| Fine pitches (ISO 261) | 0.2 |
| Tap drill, coarse | 0.75 mm0.030 in |
| Tap drill, fine | 0.8 mm0.031 in |
| d₂Pitch diameter | 0.838 mm0.0330 in |
| D₁Minor diameter, nut | 0.729 mm0.0287 in |
| d₃Minor diameter, bolt | 0.693 mm0.0273 in |
| Clearance hole, fine | 1.1 mm0.043 in |
| Clearance hole, medium | 1.2 mm0.047 in |
| Clearance hole, coarse | 1.3 mm0.051 in |
| ISO 261 size choice | 1st choice (preferred) |
M1 and M1.2 are used in watches, eyeglasses and small instruments. Taps this small break easily. Use a tapping guide and cutting oil, and consider thread-forming taps in soft metal.
Also known as
All Metric Threads sizes
Sources
- ISO 261:1998, ISO general purpose metric screw threads, general plan
- ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
- ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
- ISO 273:1979, Fasteners, clearance holes for bolts and screws
- Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
- DIN 336: Drill diameters for tapping holes (tap drill sizes)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.