284T Motor Frame Dimensions

Motor Frame Sizes · NEMA MG 1 (inch)

The 284T frame (NEMA MG 1, inch) has a shaft height of 7 in (177.8 mm) and a 1 7/8 in (47.6 mm) shaft 4 5/8 in (117.5 mm) long. Foot holes: 11 in (279.4 mm) across × 9 1/2 in (241.3 mm) along, the first one 4 3/4 in (120.7 mm) from the shaft shoulder; hole diameter 17/32 in (13.5 mm).

HShaft height (IEC H / NEMA D)
177.8 mm7 in7 in177.8 mm
DShaft diameter (IEC D / NEMA U)
47.6 mm1 7/8 in1 7/8 in47.6 mm
AFoot holes across (IEC A / NEMA 2E)
279.4 mm11 in11 in279.4 mm
BFoot holes along (IEC B / NEMA 2F)
241.3 mm9 1/2 in9 1/2 in241.3 mm

Drawing

Drive-end view2E = 279.4 mm2E = 11 inD = 177.8 mmD = 7 in
Side view2F = 241.3 mm2F = 9 1/2 inBA = 120.7 mmBA = 4 3/4 inN-W = 117.5 mmN-W = 4 5/8 inU = 47.6 mmU = 1 7/8 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

284T specifications

HShaft height (IEC H / NEMA D)177.8 mm7 in
AFoot holes across (IEC A / NEMA 2E)279.4 mm11 in
BFoot holes along (IEC B / NEMA 2F)241.3 mm9 1/2 in
CShaft shoulder to first hole (IEC C / NEMA BA)120.7 mm4 3/4 in
KFoot bolt hole (IEC K / NEMA H)13.5 mm17/32 in
DShaft diameter (IEC D / NEMA U)47.6 mm1 7/8 in
EShaft extension (IEC E / NEMA N-W)117.5 mm4 5/8 in

Same shaft height, other foot length

Similar shaft height in the other system

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.