355M Motor Frame Dimensions

Motor Frame Sizes · IEC 60072-1 (mm)

The 355M frame (IEC 60072-1, mm) has a shaft height of 355 mm (13.976 in) and a 95 mm (3.740 in) shaft 170 mm (6.693 in) long. Foot holes: 610 mm (24.016 in) across × 560 mm (22.047 in) along, the first one 254 mm (10 in) from the shaft shoulder; hole diameter 28 mm (1.102 in).

HShaft height (IEC H / NEMA D)
355 mm13.976 in13.976 in355 mm
DShaft diameter (IEC D / NEMA U)
95 mm3.740 in3.740 in95 mm
AFoot holes across (IEC A / NEMA 2E)
610 mm24.016 in24.016 in610 mm
BFoot holes along (IEC B / NEMA 2F)
560 mm22.047 in22.047 in560 mm

Drawing

Drive-end viewA = 610 mmA = 24.016 inH = 355 mmH = 13.976 in
Side viewB = 560 mmB = 22.047 inC = 254 mmC = 10 inE = 170 mmE = 6.693 in⌀D = 95 mm⌀D = 3.740 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

355M specifications

HShaft height (IEC H / NEMA D)355 mm13.976 in
AFoot holes across (IEC A / NEMA 2E)610 mm24.016 in
BFoot holes along (IEC B / NEMA 2F)560 mm22.047 in
CShaft shoulder to first hole (IEC C / NEMA BA)254 mm10 in
KFoot bolt hole (IEC K / NEMA H)28 mm1.102 in
DShaft diameter (IEC D / NEMA U)95 mm3.740 in
EShaft extension (IEC E / NEMA N-W)170 mm6.693 in
Shaft diameter, 2-pole (IEC)75 mm2.953 in
Shaft extension, 2-pole (IEC)140 mm5.512 in

Same shaft height, other foot length

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.