56 Motor Frame Dimensions
Motor Frame Sizes · IEC 60072-1 (mm)
The 56 frame (IEC 60072-1, mm) has a shaft height of 56 mm (2.205 in) and a 9 mm (0.354 in) shaft 20 mm (0.787 in) long. Foot holes: 90 mm (3.543 in) across × 71 mm (2.795 in) along, the first one 36 mm (1.417 in) from the shaft shoulder; hole diameter 5.8 mm (0.228 in).
- HShaft height (IEC H / NEMA D)
- 56 mm2.205 in2.205 in56 mm
- DShaft diameter (IEC D / NEMA U)
- 9 mm0.354 in0.354 in9 mm
- AFoot holes across (IEC A / NEMA 2E)
- 90 mm3.543 in3.543 in90 mm
- BFoot holes along (IEC B / NEMA 2F)
- 71 mm2.795 in2.795 in71 mm
Drawing
56 specifications
| HShaft height (IEC H / NEMA D) | 56 mm2.205 in |
|---|---|
| AFoot holes across (IEC A / NEMA 2E) | 90 mm3.543 in |
| BFoot holes along (IEC B / NEMA 2F) | 71 mm2.795 in |
| CShaft shoulder to first hole (IEC C / NEMA BA) | 36 mm1.417 in |
| KFoot bolt hole (IEC K / NEMA H) | 5.8 mm0.228 in |
| DShaft diameter (IEC D / NEMA U) | 9 mm0.354 in |
| EShaft extension (IEC E / NEMA N-W) | 20 mm0.787 in |
All motor frames
Sources
- IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
- NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
- Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
- Motion Industries: NEMA quick reference chart
- Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
- ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.