NEMA 6-50 Plug and Receptacle: 250 V, 50 A
NEMA Configurations · Straight blade
NEMA 6-50 (Straight blade) is rated 50 A at 250 V: 2 poles, 3 wires. Grounding. Contacts: X, Y, G. Typical use: Welders, kilns, plasma cutters, Level 2 EV charging.
- Rated voltage
- 250 V
- Rated current
- 50 A
- Poles
- 2
- Wires
- 3
Drawing
6-50 specifications
| Rated voltage | 250 V |
|---|---|
| Rated current | 50 A |
| Poles | 2 |
| Wires | 3 |
| Grounding | Grounding |
| Phase | Single-phase |
| Contacts | X, Y, G |
| Typical use | Welders, kilns, plasma cutters, Level 2 EV charging |
A 6-50 has no neutral, so it cannot feed anything that needs 120 V. Many welders and Level 2 EV chargers use it; the outlet is usually on a 50 A circuit, or a 40 A circuit where the welder's nameplate allows it (NEC 630.11).
Also known as
6-50R6-50P
Other ratings with the same configuration number
All NEMA configurations
Sources
- ANSI/NEMA WD 6: Wiring Devices: Dimensional Specifications (configuration chart)
- Hubbell Wiring Device-Kellems: NEMA configuration chart (straight blade and Twist-Lock)
- Leviton: NEMA configuration chart
- Legrand / Pass & Seymour: NEMA configurations for plugs and receptacles
- NFPA 70 (NEC) 406.4, 210.21(B)(3): receptacle ratings on branch circuits
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.