AS568-001 O-Ring Size

O-Ring Sizes (AS568) · -001 to -003: small sizes with their own cross-sections

The AS568-001 O-ring has an inside diameter of 0.029 in (0.74 mm) and a cross-section of 0.040 in (1.02 mm), so its outside diameter is 0.109 in (2.77 mm). Cross-section tolerance is ± 0.003 in (0.08 mm). The same size is sold as 2-001 (Parker), BS 1806 and ISO 3601-1 inch size 001, in any compound.

IDInside diameter
0.74 mm0.029 in0.029 in0.74 mm
CSCross-section
1.02 mm0.040 in0.040 in1.02 mm
ODOutside diameter (ref.)
2.77 mm0.109 in0.109 in2.77 mm

Drawing

OD 2.77 mmOD 0.109 inID 0.74 mmID 0.029 in
CS 1.02 mmCS 0.040 in± 0.08 mm± 0.003 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-001 specifications

IDInside diameter0.029 in0.74 mm
CSCross-section0.040 in1.02 mm
ODOutside diameter (ref.)0.109 in2.77 mm
CS tolerance (±)0.003 in0.08 mm

The -001, -002 and -003 are the only AS568 sizes with their own cross-sections (0.040, 0.050 and 0.060 in); all other sizes share one of the five standard cross-sections.

Also known as

-0012-001AS568A-001AS568B-001#001

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.