AS568-002 O-Ring Size

O-Ring Sizes (AS568) · -001 to -003: small sizes with their own cross-sections

The AS568-002 O-ring has an inside diameter of 0.042 in (1.07 mm) and a cross-section of 0.050 in (1.27 mm), so its outside diameter is 0.142 in (3.61 mm). Cross-section tolerance is ± 0.003 in (0.08 mm). The same size is sold as 2-002 (Parker), BS 1806 and ISO 3601-1 inch size 002, in any compound.

IDInside diameter
1.07 mm0.042 in0.042 in1.07 mm
CSCross-section
1.27 mm0.050 in0.050 in1.27 mm
ODOutside diameter (ref.)
3.61 mm0.142 in0.142 in3.61 mm

Drawing

OD 3.61 mmOD 0.142 inID 1.07 mmID 0.042 in
CS 1.27 mmCS 0.050 in± 0.08 mm± 0.003 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-002 specifications

IDInside diameter0.042 in1.07 mm
CSCross-section0.050 in1.27 mm
ODOutside diameter (ref.)0.142 in3.61 mm
CS tolerance (±)0.003 in0.08 mm

Also known as

-0022-002AS568A-002AS568B-002#002

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.