AS568-003 O-Ring Size

O-Ring Sizes (AS568) · -001 to -003: small sizes with their own cross-sections

The AS568-003 O-ring has an inside diameter of 0.056 in (1.42 mm) and a cross-section of 0.060 in (1.52 mm), so its outside diameter is 0.176 in (4.47 mm). Cross-section tolerance is ± 0.003 in (0.08 mm). The same size is sold as 2-003 (Parker), BS 1806 and ISO 3601-1 inch size 003, in any compound.

IDInside diameter
1.42 mm0.056 in0.056 in1.42 mm
CSCross-section
1.52 mm0.060 in0.060 in1.52 mm
ODOutside diameter (ref.)
4.47 mm0.176 in0.176 in4.47 mm

Drawing

OD 4.47 mmOD 0.176 inID 1.42 mmID 0.056 in
CS 1.52 mmCS 0.060 in± 0.08 mm± 0.003 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-003 specifications

IDInside diameter0.056 in1.42 mm
CSCross-section0.060 in1.52 mm
ODOutside diameter (ref.)0.176 in4.47 mm
CS tolerance (±)0.003 in0.08 mm

Also known as

-0032-003AS568A-003AS568B-003#003

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.