AS568-355 O-Ring Size

O-Ring Sizes (AS568) · -309 to -395: 0.210 in (5.33 mm) cross-section

The AS568-355 O-ring has an inside diameter of 5.225 in (132.71 mm) and a cross-section of 0.210 in (5.33 mm), so its outside diameter is 5.645 in (143.38 mm). Cross-section tolerance is ± 0.005 in (0.13 mm). The same size is sold as 2-355 (Parker), BS 1806 and ISO 3601-1 inch size 355, in any compound.

IDInside diameter
132.71 mm5.225 in5.225 in132.71 mm
CSCross-section
5.33 mm0.210 in0.210 in5.33 mm
ODOutside diameter (ref.)
143.38 mm5.645 in5.645 in143.38 mm

Drawing

OD 143.38 mmOD 5.645 inID 132.71 mmID 5.225 in
CS 5.33 mmCS 0.210 in± 0.13 mm± 0.005 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-355 specifications

IDInside diameter5.225 in132.71 mm
CSCross-section0.210 in5.33 mm
ODOutside diameter (ref.)5.645 in143.38 mm
CS tolerance (±)0.005 in0.13 mm

Also known as

-3552-355AS568A-355AS568B-355#355

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.