AS568-431 O-Ring Size
O-Ring Sizes (AS568) · -425 to -475: 0.275 in (6.99 mm) cross-section
The AS568-431 O-ring has an inside diameter of 5.225 in (132.71 mm) and a cross-section of 0.275 in (6.98 mm), so its outside diameter is 5.775 in (146.69 mm). Cross-section tolerance is ± 0.006 in (0.15 mm). The same size is sold as 2-431 (Parker), BS 1806 and ISO 3601-1 inch size 431, in any compound.
- IDInside diameter
- 132.71 mm5.225 in5.225 in132.71 mm
- CSCross-section
- 6.98 mm0.275 in0.275 in6.98 mm
- ODOutside diameter (ref.)
- 146.69 mm5.775 in5.775 in146.69 mm
Drawing
AS568-431 specifications
| IDInside diameter | 5.225 in132.71 mm |
|---|---|
| CSCross-section | 0.275 in6.98 mm |
| ODOutside diameter (ref.) | 5.775 in146.69 mm |
| CS tolerance (±) | 0.006 in0.15 mm |
Also known as
-4312-431AS568A-431AS568B-431#431
Same inside diameter, other cross-sections
All AS568 O-ring sizes
Sources
- SAE AS568F: Aerospace size standard for O-rings
- Parker O-Ring Handbook ORD 5700: AS568 size table
- Apple Rubber: Standard AS568 size O-rings
- Global O-Ring and Seal: AS568 O-ring size chart
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.