22 × 14 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 22 × 14 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 75–85 mm (2.953–3.346 in). The shaft keyway is 9 mm (0.354 in) deep and the hub keyway 5.4 mm (0.213 in) deep.

dShaft diameter (over – up to)
75–85 mm2.953–3.346 in2.953–3.346 in75–85 mm
bWidth
22 mm0.866 in0.866 in22 mm
t1Shaft keyway depth
9 mm0.354 in0.354 in9 mm
t2Hub keyway depth
5.4 mm0.213 in0.213 in5.4 mm

Drawing

b 22 mmb 0.866 int1 9 mmt1 0.354 int2 5.4 mmt2 0.213 in⌀80 mm⌀3.150 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

22 × 14 specifications

dShaft diameter (over – up to)75–85 mm2.953–3.346 in
bWidth22 mm0.866 in
hHeight14 mm0.551 in
t1Shaft keyway depth9 mm0.354 in
t2Hub keyway depth5.4 mm0.213 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.