20 × 12 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 20 × 12 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 65–75 mm (2.559–2.953 in). The shaft keyway is 7.5 mm (0.295 in) deep and the hub keyway 4.9 mm (0.193 in) deep.

dShaft diameter (over – up to)
65–75 mm2.559–2.953 in2.559–2.953 in65–75 mm
bWidth
20 mm0.787 in0.787 in20 mm
t1Shaft keyway depth
7.5 mm0.295 in0.295 in7.5 mm
t2Hub keyway depth
4.9 mm0.193 in0.193 in4.9 mm

Drawing

b 20 mmb 0.787 int1 7.5 mmt1 0.295 int2 4.9 mmt2 0.193 in⌀70 mm⌀2.756 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

20 × 12 specifications

dShaft diameter (over – up to)65–75 mm2.559–2.953 in
bWidth20 mm0.787 in
hHeight12 mm0.472 in
t1Shaft keyway depth7.5 mm0.295 in
t2Hub keyway depth4.9 mm0.193 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.