28 × 16 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 28 × 16 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 95–110 mm (3.740–4.331 in). The shaft keyway is 10 mm (0.394 in) deep and the hub keyway 6.4 mm (0.252 in) deep.

dShaft diameter (over – up to)
95–110 mm3.740–4.331 in3.740–4.331 in95–110 mm
bWidth
28 mm1.102 in1.102 in28 mm
t1Shaft keyway depth
10 mm0.394 in0.394 in10 mm
t2Hub keyway depth
6.4 mm0.252 in0.252 in6.4 mm

Drawing

b 28 mmb 1.102 int1 10 mmt1 0.394 int2 6.4 mmt2 0.252 in⌀102.5 mm⌀4.035 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

28 × 16 specifications

dShaft diameter (over – up to)95–110 mm3.740–4.331 in
bWidth28 mm1.102 in
hHeight16 mm0.630 in
t1Shaft keyway depth10 mm0.394 in
t2Hub keyway depth6.4 mm0.252 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.