32 × 18 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 32 × 18 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 110–130 mm (4.331–5.118 in). The shaft keyway is 11 mm (0.433 in) deep and the hub keyway 7.4 mm (0.291 in) deep.

dShaft diameter (over – up to)
110–130 mm4.331–5.118 in4.331–5.118 in110–130 mm
bWidth
32 mm1.260 in1.260 in32 mm
t1Shaft keyway depth
11 mm0.433 in0.433 in11 mm
t2Hub keyway depth
7.4 mm0.291 in0.291 in7.4 mm

Drawing

b 32 mmb 1.260 int1 11 mmt1 0.433 int2 7.4 mmt2 0.291 in⌀120 mm⌀4.724 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

32 × 18 specifications

dShaft diameter (over – up to)110–130 mm4.331–5.118 in
bWidth32 mm1.260 in
hHeight18 mm0.709 in
t1Shaft keyway depth11 mm0.433 in
t2Hub keyway depth7.4 mm0.291 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.